Panasonic DBS-576 Technical Manual page 501

Section 400-Programming
Introduction
TRS Override on SSD Dialing
(all CPCs) - Version 1.0 or higher
Set whether SSD dialing will override TRS for originators with this TRS Class.
0
System
Configuration
FF1
System
FF2
Notes:
Trunks
If this is set to 0=Do Not Allow (default), the system will check the phone number stored inside the SSD
bin for TRS restrictions, and allow or block the call based on those restrictions.
If this is set to 1=Allow, users in this TRS Class can dial SSD numbers regardless of any TRS
FF3
restrictions that may apply to the dialed number.
Extensions
Related Programming:
FF4 Allowed SSD Range (pg. 6-24)
SSD Numbers (pg. 8-46)
FF-/Soft Keys
FF5
Star ( ) and Pound (#) Dialing Restriction
Groups
(all CPCs) - Version 1.0 or higher
Allow/Restrict dialing the
FF6
TRS/ARS
FF7
Applications
FF8
Notes:
Maintenance
Related Programming:
Appendix A
Appendix B
576-13-400
FF6 1 02 (01-50)
TRS Class No. 1-50
assigned to the originator
of an outbound call
(extension, DISA trunk, etc.)
FF6 1 03 0001 Hold (000-799) Hold
FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
or # key for originators with this TRS Class.
FF6 1 02 (01-50)
TRS Class No. 1-50
assigned to the originator
of an outbound call
(extension, DISA trunk, etc.)
DBS 576 (USA) issued 05/20/98
0003 Hold (0 or 1) Hold
0=Do not allow TRS override for
SSDs. (default)
1=Allow TRS override for SSDs.
0004 Hold (0 or 1) Hold
0=Allow
1=Do not allow
FF6: TRS/ARS
5   %

5  L0 %
and # dialing. (default)
or # dialing.
Page 6-23
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B