Panasonic DBS-576 Technical Manual page 460

FF5: Groups
Notes:
Introduction
Related Programming:
0
System
Configuration
FF1
Attendant HG/Day2 Queuing Timer
System
(all CPCs) - Version 1.0 or higher
Set the amount of time an incoming call is queued in the Attendant Hunt Group
(waiting for a member to become available) before being forwarded to the next
FF2
hunt group or extension, during Day2 mode.
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
Notes:
A call is queued in a hunt group after the idle members are tried (once each) and the remaining members
are busy.
FF5
If there is no assigned Next Extension/Hunt Group (see next address), intercom and network calls will
Groups
be dropped after the Queuing Timer expires. CO calls will return to "multiple CO incoming" status.
Related Programming:
FF6
Attendant HG/Day2 Next Extension/Hunt Group (pg. 5-9)
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 5-8
FF5 0 03 23 Hold (0-255) Hold
Day2
Attendant Hunt Group
DBS 576 (USA) issued 05/20/98
Section 400-Programming
Queuing Timer:
0=stay in the same Hunt Group (default)
1-255=no. of seconds
FF5 0 03 24 Hold (0-9999) Hold
Introduction
0
Configuration
FF1
$
System
/%% D--
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
System