Ff8 1 08: Walking Trs Codes - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF8 1 08: Walking TRS Codes

0
System
Walking TRS Code
Configuration
(all CPCs) - Version 1.0 or higher
Assign a 4-digit Walking TRS Code to each extension.
FF1
FF8 1 08 Hold (0-9999) Hold (4-digit Code) Hold
System
FF2
Trunks
NOTE: The same Walking TRS Code can be assigned to multiple extensions.
Notes:
FF3
Walking TRS: End-users can make calls on other extensions that would normally block the call, by
Extensions
entering: Walking TRS Feature Access Code + user's own extension number + user's Walking TRS
Code. The user can then access a trunk line and dial the call; the TRS Class assigned to the user's own
extension (not the extension currently being used) will determine whether the dialed phone number is
FF4
allowed or not. ON/OFF or hangup will return the phone to its normal state. A hookflash will keep the
phone in Walking TRS mode.
FF-/Soft Keys
In SMDR reports, Walking TRS calls will be preceded by "Wxxxx" ("xxxx" is the extension number
dialed).
FF5
Groups
Related Programming:
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
Extension No.
DBS 576 (USA) issued 05/20/98
FF8: Maintenance
A,4 ::::
Walking TRS Code (4 digits)
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 8-61