Ff2 2: T1 Trunks (E&M Tie) - Panasonic DBS-576 Technical Manual

FF2: Trunk Programming (T1 E&M Tie)
2.
Introduction
FF2 2: T1 Trunks (E&M Tie)
NOTE:
0
System
Configuration
FF1
Trunk Connection Type (CO/Network)
System
(all CPCs) - Version 1.0 or higher
Set whether the T1 channel is connected to the CO or to a private network.
FF2
Trunks
BSSCC: T1 (E&M Tie) Channel Position
FF3
Extensions
FF4
Notes:
FF-/Soft Keys
The remaining addresses in this T1 Trunks (E&M Tie) section will apply if the T1 trunk is set to
2=Private Network in the above address. If 1=CO (default) is chosen instead, go to pg. 2-86.
Choose 1=CO (and follow the addresses starting on pg. 2-86) if the carrier is providing DID/DNIS
FF5
trunks with E&M signaling.
Groups
Related Programming:
FF6 Trunk Connection Type (CO/PBX) (pg. 2-127)
TRS/ARS
Trunk Number Assignment
FF7
(all CPCs) - Version 1.0 or higher
Applications
Assign a trunk number to each T1 channel.
FF8
Maintenance
BSSCC: T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
Appendix A
Appendix B
Page 2-116
These settings apply to point-to-point network trunks (connections
between 2 or more switches). For "CO" T1 trunk programming, go to
pg. 2-86.
FF2 2 BSSCC
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2 2 BSSCC 01 Hold (0-576) Hold
DBS 576 (USA) issued 05/20/98
00 Hold (1-2) Hold
1=CO (default)
2=Private Network (E&M)
FF2 2 BSSCC 03 03 Hold (0 or 1) Hold
Trunk Number 1-576
(0 = no trunk)
default: [no assignment]
Section 400-Programming
$
%3 %6 #0)*%
$
%-4 )-8
(or BLK-DOWN)
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B