Panasonic DBS-576 Technical Manual page 442

FF4: FF-Key/Soft Key Feature Assignment
Introduction
Trunk FF-Key: Outbound Call Restriction
(all CPCs) - Version 1.0 or higher
(for digital keyphones, SLTs, and EM24s) Allow/Restrict outbound calls on the FF-
0
key programmed as a CO trunk, MCO trunk group, Virtual Port, or DSS/BLF key.
System
Configuration
FF4 0 BSSC 1 (01-32) Hold CONF (0 or 1) Hold
FF1
BSSC: Extension Port
System
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-8
FF2
Trunks
Notes:
The LCD display will show the allow/restrict settings for this and the
FF3
next 5 addresses after the first "Hold" is pressed in the above address:
Extensions
If "Outbound Call Restriction" is set to 0=Allow, and
"Inbound Answer Restriction" is set to 1=Do Not Allow,
the FF-key can't be used while an incoming call is ringing in on it (the LED will blink green). Once the
FF4
call is answered on another phone, however, the LED will extinguish and the FF-key will become
available for making an outbound call.
FF-/Soft Keys
To set delayed ringing for trunk FF-keys, use the Day1/2/Night Delayed Ring Type/Destination
addresses in FF2.
FF5
Groups
Related Programming:
Trunk Key Operation: Direct Calls (pg. 3-14)
Trunk Key Operation: HOLD (pg. 3-15)
FF6 Trunk Key Operation: Multiple Call Pickup (pg. 3-15)
Trunk Key Operation: Brokers Hold (pg. 3-16)
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 4-10
01=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key
FF3 0 BSSC 04 12 Hold (0 or 1) Hold
FF3 0 BSSC 04 13 Hold (0 or 1) Hold
FF3 0 BSSC 04 14 Hold (0 or 1) Hold
FF3 0 BSSC 04 15 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
Section 400-Programming
#-! %
0=Allow outbound calls on this FF-key.
(default)
1=Do Not Allow outbound calls on this
FF-key.
$ ' ()((((
3 )"#
=  HI
(
=  HI
)
Introduction
$
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400