Panasonic DBS-576 Technical Manual page 337

Section 400-Programming
Notes:
Introduction
This setting is available only if the Trunk Signal Type is set for "0" (Loop Start) or "1" (Ground Start);
it is not available for DID signaling types.
0 Related Programming:
System
Configuration
Trunk Signal Type (pg. 2-87)
FF1
Ground Start Ring Type
System
(all CPCs) - Version 1.0 or higher
Set whether the CO supplies the real ringing signal or not. Applies to Ground-
Start trunks, which typically need Tip-Ground for incoming signal.
FF2
Trunks
FF3
BSSCC: T1 (CO) Channel Position
Extensions
FF4
Notes:
FF-/Soft Keys
This setting is available only if the Trunk Signal Type is set for "1" (Ground Start); it is not available
for Loop Start or DID signaling types. (Ground Start trunks typically need Tip-side ground for
FF5
incoming signal.)
Groups
Related Programming:
Trunk Signal Type (pg. 2-87)
FF6
TRS/ARS
DID Ring Detect Timer
FF7
(all CPCs) - Version 1.0 or higher
Applications
Set the timer for detecting DID ringing, which will be used to specify the ringing.
FF8
Maintenance
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
Appendix A
Appendix B
576-13-400
FF2 2 BSSCC 02 00 Hold (0-3) Hold
FF2 2 BSSCC
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
FF2 2 BSSCC 02 00 Hold (0-3) Hold
FF2 2 BSSCC
DBS 576 (USA) issued 05/20/98
02 03 Hold (0 or 1) Hold
0=CO ringing signal. (default)
1=No CO ringing signal.
02 04 Hold (0 or 1) Hold
0=32 ms (default)
1=96 ms
FF2: Trunk Programming (T1 CO)
$
1  %6
$ 
 *% %
Page 2-89
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B