Panasonic DBS-576 Technical Manual page 471

Section 400-Programming
Notes:
Introduction
A trunk cannot belong to more than one Trunk Group (the most recent assignment is the priority).
MCO-Outbound Trunk Groups can be assigned to MCO Access codes (e.g., MCO-1 is "9" dialing by
default; assign the Trunk Group to be accessed when the user dials "9" or selects MCO-1).
0
System
MCO-Outbound Trunk Groups are also used in Toll Restriction (TRS) and Automatic Route Selection
Configuration
(ARS).
Related Programming:
FF1
Tenant Group MCO Access: Outbound Trunk Groups (pg. 1-164)
System
Hold
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400 DBS 576 (USA) issued 05/20/98
FF1 3 01 (0001-0360) Hold (0-99 or 0-72)
FF5: Groups
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 5-19