Panasonic DBS-576 Technical Manual page 293

Section 400-Programming
Introduction
Auto Answer Timer
(all CPCs) - Version 1.0 or higher
Set how long the system will wait before opening a voice path when the user
0
makes an outgoing call on this trunk.
System
Configuration
FF1
System
FF2
Trunks
Notes:
Whether Auto Answer is enabled or disabled on this trunk (see FF2 0 BSSC 01 1), the Auto Answer
Timer will begin after the digits are outpulsed.
FF3
Extensions
If Auto Answer is enabled, the system will wait until the Timer expires before opening a voice path.
If Auto Answer is disabled, the system will open the voice path when either: (1) the answer signal is
received from the other end, or (2) the Auto Answer Timer expires -- whichever occurs first.
FF4
FF-/Soft Keys
Related Programming:
Auto Answer for Outbound Calls (pg. 2-39)
FF5
Groups
FF6
TRS/ARS
Not Used
(all CPCs) - Version 1.0 or higher
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF2 0 BSSC
BSSC: E&M Tie Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4
FF2 0 BSSC
DBS 576 (USA) issued 05/20/98
FF2: Trunk Programming (Analog E&M Tie)
01 18 Hold (0-3) Hold
0=1 second (default)
1=2 seconds
2=3 seconds
3=4 seconds
FF2 0 BSSC 01 06 Hold (0 or 1) Hold
01 19 Hold
Introduction
$ 
/-! /) %
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
$ &
Applications
)! B
FF8
Maintenance
Appendix A
Appendix B
Page 2-45
System