Panasonic DBS-576 Technical Manual page 500

FF6: TRS/ARS
for analog CO trunks:
Introduction
TRS Class Assignment (Day) (pg. 2-34)
TRS Class Assignment (Night) (pg. 2-35)
for analog E&M tie-trunks:
TRS Class Assignment (Day) (pg. 2-57)
TRS Class Assignment (Night) (pg. 2-57)
0
System
for ISDN trunks:
Configuration
TRS Class Assignment (Day) (pg. 2-81)
TRS Class Assignment (Night) (pg. 2-82)
for T1 CO trunks:
FF1
TRS Class Assignment (Day) (pg. 2-113)
System TRS Class Assignment (Night) (pg. 2-114)
for T1 E&M tie-trunks:
TRS Class Assignment (Day) (pg. 2-136)
TRS Class Assignment (Night) (pg. 2-136)
FF2
for digital keyphones and SLTs:
Trunks
TRS Class Assignment (Day) (pg. 3-25)
TRS Class Assignment (Night) (pg. 3-25)
for S-Point ISDN extensions:
TRS Class Assignment (Day) (pg. 3-37)
FF3
TRS Class Assignment (Night) (pg. 3-38)
Extensions
FF6 0 00: Leading Digits Table (pg. 6-5)
FF6 0 01: Analyze Digits Table (pg. 6-10)
FF4
FF-/Soft Keys
Dialing Restriction During Inbound Calls
(all CPCs) - Version 1.0 or higher
FF5
Set whether dialing during an incoming call is restricted for originators with
Groups
this TRS Class.
FF6 1 02
FF6
TRS/ARS
FF7
Applications
Notes:
FF8
If an extension user receives an incoming call and remains off-hook after the caller hangs up, sometimes
Maintenance
the CO will send dial tone to the extension, allowing an outgoing call to be placed without being routed
through ARS/TRS. This address prevents that from happening, if set to 1=Do not allow.
Related Programming:
Appendix A
Appendix B
Page 6-22
FF2 0 BSSC 06 0 Hold (1-50) Hold
FF2 0 BSSC 06 1 Hold (1-50) Hold
FF2 0 BSSC 06 0 Hold (1-50) Hold
FF2 0 BSSC 06 1 Hold (1-50) Hold
FF2 1 BSSC 07 0 Hold (1-50) Hold
FF2 1 BSSC 07 1 Hold (1-50) Hold
FF2 2 BSSCC 07 0 Hold (1-50) Hold
FF2 2 BSSCC 07 1 Hold (1-50) Hold
FF2 2 BSSCC 07 0 Hold (1-50) Hold
FF2 2 BSSCC 07 1 Hold (1-50) Hold
FF3 0 BSSC 06 0 Hold (1-50) Hold
FF3 0 BSSC 06 1 Hold (1-50) Hold
FF3 1 BSSC 05 0 Hold (1-50) Hold
FF3 1 BSSC 05 1 Hold (1-50) Hold
(01-50) 0002
TRS Class No. 1-50
assigned to the originator
of an outbound call
(extension, DISA trunk, etc.)
DBS 576 (USA) issued 05/20/98
Section 400-Programming
Hold (0 or 1) Hold
0=No restriction. (default)
1=Do not allow dialing on the extension
during an incoming call.
Introduction
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
5  )#2* %
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
System