Extension Number Assignment - Panasonic DBS-576 Technical Manual

FF3: Extension Programming
Introduction
Phone Version (Digital Keyphones)
(all CPCs) - Version 1.0 or higher
Define the version of the digital keyphone (if present) at the extension port.
0
System
Configuration
FF1
System
FF2
Trunks
Notes:
These phone versions include digital keyphones, EM/24s, and DSS/72s.
FF3
Extensions
Only Digital SLTs require this setting (set to "5"). For VB-44 and VB-43 series phones (settings "1"
thru "4"), the system will automatically detect the phone type when you re-plug the station cable.
If this address is set to "5" (Digital SLT) and a VB-43 or VB-44 series keyphone is later plugged into the
FF4
station, you must reset this address to "1" thru "4".
FF-/Soft Keys
If an analog SLT phone is plugged in, this address will display a "0" setting for the station.
Related Programming:
FF5
Groups
FF6
TRS/ARS

Extension Number Assignment

(all CPCs) - Version 1.0 or higher
Assign an extension number (0-9999) to the extension port.
FF7
Applications
FF8
Maintenance
Notes:
Appendix A
Press the BLK-DOWN soft key instead of the last HOLD in the above address, to scroll to the next
BSSC extension port position and assign it an Extension Number (stay in same address).
Appendix B
Page 3-4
FF3 0 BSSC 01 Hold (1-5) Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF3 0 BSSC 02 Hold (0-9999) Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
Section 400-Programming
1=Digital Keyphone
2=Digital Keyphone
3=Digital Keyphone
4=Digital Keyphone
5=Digital SLT
defaults: (see Notes below)
(or BLK-DOWN)
Extension Number (0-9999)
default: [no assignment]
Introduction
$
3%*5 %6
0
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
$
*:% )-8
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
System