Slide Ringing - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

Slide Ringing

(all CPCs) - Version 1.0 or higher
Enable/Disable Slide Ringing for incoming calls on this trunk that ring
0 unanswered for longer than the Slide Ring/Alarm Ring Timer.
System
Configuration
FF1
System BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF2
Trunks
Notes:
Slide Ringing: Applies to extensions that are Slide Ringing-enabled and have trunk FF-key
assignments (where the trunk is also enabled for Slide Ringing in the above address). An incoming call
FF3
on the trunk will ring at the assigned extension or hunt group first (see Day1/2/Night Ring
Extensions
Assignments in FF2). Then, after the Slide Ring/Alarm Ring Timer expires, the call will also begin
ringing at the extension(s) that have an FF-key for the trunk (see FF-Key Feature Assignment in FF4).
Related Programming:
FF4
FF-/Soft Keys
Slide Ring/Alarm Ring Timer (Day1) (pg. 1-132)
Slide Ring/Alarm Ring Timer (Day2) (pg. 1-133)
Slide Ring/Alarm Ring Timer (Night) (pg. 1-133)
Slide Ringing Receive (pg. 3-9) on individual extensions
FF5
Ring Type/Destination - Day1, Day2, Night (pg. 2-28)
Groups
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7)
(Code) Hold
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF2 0 BSSC
DBS 576 (USA) issued 05/20/98
FF2: Trunk Programming (Analog CO)
02 14 Hold (0 or 1) Hold
0=Disable Slide Ringing. (default)
1=Enable Slide Ringing.
FF1 1 02 0007 Hold (0-255) Hold
FF1 1 02 0008 Hold (0-255) Hold
FF1 1 02 0009 Hold (0-255) Hold
FF3 0 BSSC 04 02 Hold (0 or 1) Hold
FF2 0 BSSC 03 (0-5) Hold (0-6 or 0-9999) Hold
$ 
,  
FF4 0 BSSC 0 (01-32) Hold FLASH
Page 2-25
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B