Panasonic DBS-576 Technical Manual page 342

FF2: Trunk Programming (T1 CO)
Introduction
DTMF On/Off Pattern During Talk
(all CPCs) - Version 1.0 or higher
Set the DTMF signaling pattern that will apply after an extension user connects
0
to the called party during a CO call on this T1 channel.
System
Configuration
FF1
System
FF2
Trunks
Notes:
This address applies to the entry of account codes, selection of voice menu options, etc. during a call.
FF3
Up to 3 different DTMF patterns can be defined in FF1 1 01 (0016-0019).
Extensions
(all CPCs - Version 1.3 and higher)
signals will be sent to the other party (mainly for Voice Mail connection).
FF4
Related Programming:
FF-/Soft Keys
DTMF ON: Pattern #1 (pg. 1-123)
DTMF OFF: Pattern #1 (pg. 1-124)
DTMF ON/OFF: Pattern #2 (pg. 1-125)
FF5
DTMF ON/OFF: Pattern #3 (pg. 1-126)
Groups
DTMF On/Off Pattern for Outgoing Dialing
FF6
TRS/ARS
(all CPCs) - Version 1.0 or higher
Set the DTMF signaling pattern that will apply to the dialing of outbound phone
numbers (DTMF sent to CO) on this T1 channel.
FF7
Applications
FF8
Maintenance
Notes:
Appendix A
Up to 3 different DTMF patterns can be defined in FF1 1 01 (0016-0019).
Appendix B
Page 2-94
FF2 2 BSSCC
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
During a 3-Party Conference, if an extension dials digit(s), DTMF
FF1 1 01 0016 Hold (1-255) Hold
FF1 1 01 0017 Hold (1-255) Hold
FF2 2 BSSCC
BSSCC: T1 (CO) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
DBS 576 (USA) issued 05/20/98
02 10 Hold (0-2) Hold
FF1 1 01 0018 Hold (1-255) Hold
FF1 1 01 0019 Hold (1-255) Hold
02 11 Hold (0-2) Hold
Section 400-Programming
$
%2" $%) %,4
0=DTMF Pattern #1
1=DTMF Pattern #2 (default)
2=DTMF Pattern #3
$
%2" $%) ,
0=DTMF Pattern #1 (default)
1=DTMF Pattern #2
2=DTMF Pattern #3
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400