Ff5 4: Paging Groups - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF5 4: Paging Groups

0
System
Configuration
External Page Port
(all CPCs) - Version 1.0 or higher
FF1
Set the position on the card (e.g., trunk card) where the Paging Adapter for
System
external paging is installed for each Paging Group.
FF2
Trunks
FF3
Extensions
FF4
Notes:
FF-/Soft Keys
If the above address is left at the default "*", voice will be sent through the paging port on the SCC
board. To disable external page output, press FLASH after
"*" setting.
FF5
Groups
Related Programming:
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF5 4 (01-10)
Paging Group:
01=Paging Group 1
02=Paging Group 2
...
10=Paging Group 0
DBS 576 (USA) issued 05/20/98
01 Hold (BSSC)
External Paging Adapter port position:
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-8
default: * (use paging port on SCC board)
01 Hold
FF5: Groups
$ '
*+, $!
Hold
in the above address to clear the
Page 5-21
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B