Panasonic DBS-576 Technical Manual page 86

FF1: System Programming
If this address is set to "1" (system automatically accesses a trunk), the trunk will be automatically
Introduction
chosen from MCO-1 when the user presses the SSD/PSD number or key. In order to program an
intercom call into a speed dial bin, you must enter the Intercom access code in front of the extension
number.
0
Related Programming:
System
Configuration
PSD Numbers (pg. 8-44)
SSD Numbers (pg. 8-46)
FF1
System
Intercom Voice Call Pickup
(all CPCs) - Version 1.0 or higher
FF2
Enable or disable Call Pickup (Direct and Group) of intercom voice calls.
Trunks
FF3
Extensions
FF4
Notes:
FF-/Soft Keys
Related Programming:
FF5
Groups
FF6
BLF Call Pickup
TRS/ARS
(all CPCs) - Version 1.0 or higher
Enable/Disable the ability to pick up incoming calls on a BLF (Busy Lamp Field) key.
FF7
Applications
FF8
Maintenance
Notes:
BLF Key (or DSS/BLF Key): FF-keys assigned to represent other extensions. Press the BLF Key to
call the extension, or pick up its incoming calls on either an immediate-ring or delayed-ring basis. BLF
Appendix A
Keys are assigned in FF4: FF-Key/Soft Key Feature Assignment.
(all CPCs - Version 1.3 and higher)
Appendix B
Page 1-24
FF8 1 01 Hold 0 Hold Hold (Ext.No.) Hold (PSD) Hold FLASH (Phone No.) Hold
FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
FF1 0 02 0005 Hold (0 or 1) Hold
0=Disable Call Pickup of intercom voice calls. (default)
1=Enable Call Pickup of intercom voice calls.
FF1 0 02 0006 Hold (0 or 1) Hold
Incoming calls on BLF keys will blink green.
DBS 576 (USA) issued 05/20/98
Section 400-Programming
$'4 -6 & ',,

$'4 -6 75"
0=Disable BLF Call Pickup.
1=Enable BLF Call Pickup. (default)
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400