Panasonic DBS-576 Technical Manual page 283

Section 400-Programming
Introduction
TRS Class Assignment (Night)
(all CPCs) - Version 1.0 or higher
Assign a Toll Restriction Service (TRS) class to the trunk, applicable during
0
Night mode when the trunk originates an outbound call (such as DISA).
System
Configuration
FF1
System
FF2
Trunks
Notes:
FF3
Related Programming:
Extensions
FF6 1: TRS Class Definitions (pg. 6-15)
FF4
FF-/Soft Keys
Trunk COS Assignment
(all CPCs) - Version 1.0 or higher
Assign a Trunk Class of Service (COS) number to the trunk.
FF5
Groups
FF6
TRS/ARS
FF7
Notes:
Applications
This Trunk COS Assignment controls the ring tone for incoming calls on this trunk - CO ring tone,
intercom ring tone, or (for DIL trunks) a specific ring pattern. The Trunk COS also controls various
FF8
network settings. See FF1 0 04: Trunk COS Definitions (pg. 1-75).
Maintenance
Related Programming:
Trunk COS: Incoming Ring Tone Source (pg. 1-75)
Trunk COS: DID/DNIS Table (pg. 1-77)
Trunk COS: Paging on DISA/Tie-Line Call (pg. 1-78)
Appendix A
Trunk COS: DISA ID Verification (pg. 1-79)
Ring Pattern (pg. 2-13)
Day1/Day2/Night Ring Type/Destination (pg. 2-28)
Appendix B
576-13-400
FF2 0 BSSC
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF2 0 BSSC
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF2 0 BSSC 01 12 Hold (0-12) Hold
DBS 576 (USA) issued 05/20/98
06 1 Hold (1-50) Hold
TRS Class No. 1-50 for Night Mode
default: 1
07 Hold (1-16) Hold
Trunk COS No. 1-16
default: 1
FF1 0 04 (00-15) 01 Hold (0 or 1) Hold
FF1 0 04 (00-15) 04 Hold (0 or 1) Hold
FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
FF1 0 04 (00-15) 06 Hold (0 or 1) Hold
FF2 0 BSSC 03 (0 thru 5) ...
FF2: Trunk Programming (Analog CO)
$ 
)9 % 5
$ %
%-4 #
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 2-35