Panasonic DBS-576 Technical Manual page 308

FF2: Trunk Programming (ISDN)
Notes:
Introduction
The D-Channel Position (see above address) must be entered before the D-Channel Interface ID
Code can be set. If the D-Channel Position is cleared, the Interface ID Code will be automatically
cleared as well.
0
System
Related Programming:
Configuration
FF1
System
Trunk Number Assignment (1st Channel)
(all CPCs) - Version 1.0 or higher
FF2
Enter the trunk number for the first ISDN channel only. The system will
Trunks
automatically assign sequential trunk numbers to the remaining channels on the card.
FF3
Extensions
FF4
FF-/Soft Keys
Notes:
FF5
Groups
2B+D (BRI) card: Supports up to 2 trunks.
23B+D (PRI) card: Supports up to 23 trunks (minimum 8).
24B (PRI) card: Supports up to 24 trunks (minimum 8).
FF6
Related Programming:
TRS/ARS
Trunk Numbering (pg. 1-22)
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 2-60
FF2 1 BSSC 01 Hold (0-576) Hold
BSSC: ISDN Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-4 (BRI)
or 1 (PRI)
FF1 0 02 0001 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
Section 400-Programming
%-4 )-8
Trunk No. (max. 3 digits)
default: [no assignment]
Introduction
0
System
Configuration
FF1
System
$
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400