Panasonic DBS-576 Technical Manual page 375

Section 400-Programming
Introduction
Trunk Connection Type (CO/PBX)
(all CPCs) - Version 1.0 or higher
Set whether the T1 channel connects directly to another E&M tie trunk
0
(through the CO) or is behind a PBX/Centrex.
System
Configuration
FF1
System
FF2
Trunks
Notes:
FF3
Extensions Related Programming:
PBX Trunk Access Codes (pg. 1-92)
FF4
FF-/Soft Keys
Not Used
(all CPCs) - Version 1.0 or higher
FF5
FF2 2 BSSCC
Groups
FF6
TRS/ARS
DTMF After Answer (Link Control)
FF7
(all CPCs) - Version 1.0 or higher
Applications
For calls on this T1 channel using pushbutton (DTMF) SLT phones, set whether
.
DTMF signals can be sent through the system after the called party answers.
FF8
FF2 2 BSSCC
Maintenance
BSSCC: T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
Appendix A
CC=Channel no. 01-24
Appendix B
576-13-400
FF2 2 BSSCC
BSSCC: T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
03 04 Hold
DBS 576 (USA) issued 05/20/98
03 03 Hold (0 or 1) Hold
FF1 0 08 (0001-0006) Hold FLASH (0-9999) Hold
03 05 Hold (0 or 1) Hold
0=Two-Way Link: DTMF path open
1=One-Way Link: No DTMF signaling
FF2: Trunk Programming (T1 E&M Tie)
%3 %6 #0$7:
0=CO (E&M tie) trunk. (default)
1=Behind a PBX/Centrex.
)! B
54 !!,
both ways. (default)
after the called party answers.
Introduction
$
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
$ 
Groups
FF6
TRS/ARS
$
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 2-127