Ff8 1 03: Extension Names - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF8 1 03: Extension Names

0
Extension Name Assignment
System
Configuration
(all CPCs) - Version 1.0 or higher
Assign names to extensions.
FF1
FF8 1 03 Hold 0 Hold Hold (Ext.No.) Hold FLASH (up to 10 char.) Hold
System
FF2
Notes:
Trunks
If Using a Large-Display phone to program Extension Names: After punching-in:
FF8 1 03 Hold 0 Hold Hold
in the above address, the display will show a list of existing extension numbers and name assignments,
FF3
in alphabetical order. If you don't already know the extension number, press the PREV or NEXT key to
Extensions
toggle through the list. Then press the soft key next to the extension number whose name you want to
change.
To enter the name, use the same procedure as SSD and PSD Names. See figures, pg. 8-20 for
FF4
instructions on entering names.
FF-/Soft Keys
During normal phone-system operating mode, each display phone's Extension Name will appear on the
2nd line of the display while the phone is idle. When the phone is used to call another extension, the
destination extension's assigned Name will appear on the 1st line of the display.
FF5
Groups
Related Programming:
Extension Number Assignment (pg. 3-4)
FF6
TRS/ARS
Extension Index
(all CPCs) - Version 1.0 or higher
Assign a name to Extension Indexes #1 and #2.
FF7
Applications
FF8 1 03 Hold 1 Hold Hold (1 or 2) Hold FLASH (Name) Hold
FF8
Maintenance
Notes:
Appendix A
Related Programming:
Appendix B
576-13-400
Extension No. 0-9999
FF3 0 BSSC 02 Hold (0-9999) Hold
Extension Index No. 1 or 2
DBS 576 (USA) issued 05/20/98
FF8: Maintenance

/7 *"
(clears current
data)
Name for Extension (up to 10 char.)
/ 7  * "
(clears current
data)
Name for Extension Index
(up to 4 char.)
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS

FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 8-49