Panasonic DBS-576 Technical Manual page 398

FF3: Extension Programming
Introduction
SLT Fixed Ring Pattern
(all CPCs) - Version 1.0 or higher
Set whether an SLT's receiving ring pattern is fixed (same pattern always) or
0
differs based on the call type (recall, intercom, trunk, etc.).
System
Configuration
FF1
System
FF2
Trunks
Notes:
FF3
Extensions
Related Programming:
FF4
FF-/Soft Keys
End-to-End Signaling
FF5
(all CPCs) - Version 1.0 or higher
Groups
Set whether an SLT extension port will receive DTMF signals from a digital
keyphone port.
FF6
TRS/ARS
FF7
Applications
Notes:
FF8
Maintenance
This address must be set to "1" (Receive DTMF) if the SLT port is Voice Mail, answering machine, etc.
(a device requiring DTMF).
Related Programming:
Appendix A
Appendix B
Page 3-12
FF3 0 BSSC 04 07 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
FF3 0 BSSC 04 08 Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
DBS 576 (USA) issued 05/20/98
(0 or 1) Hold
0=Different ring patterns for receiving
different call types. (default)
1=Fixed ring pattern for receiving all call types
(1 second on / 3 seconds off).
(0 or 1) Hold
0=Do not receive DTMF from digital key phone.
1=Receive DTMF from digital key phone. (default)
Section 400-Programming
$  %
"+  5%
$  
/-! $7 !(
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B