Panasonic DBS-576 Technical Manual page 589

Section 400-Programming
When you press soft key #3 (HYPHEN) to enter a hyphen, it will display as F. Pressing soft key #4
Introduction
(PAUSE) will display as R. Pressing soft key #5 (SPD-ID) will display as A.
Related Programming:
Trunk Access in Speed Dialing (pg. 1-23)
0
System
Configuration
FF1
PSD Names
System
(all CPCs) - Version 1.0 or higher
Assign names to PSD codes for each extension.
FF2
FF8 1 01 Hold 1 Hold Hold (Ext.No.) Hold (PSD) Hold FLASH (Name) Hold
Trunks
FF3
Extensions
Notes:
PSD Names are displayed alphabetically on Large-LCD phones.
FF4
To assign PSD Names:
FF-/Soft Keys
After entering the PSD Code and Hold in the above address, press FLASH to clear current data (if
any).
FF5
Then press the soft key that represents the group of letters you want to choose from.
Groups
Then press one of the FF-keys on the bottom row (underneath the LCD), that is in the same position
as the letter you want to choose.
Use the * key to erase an entry. Use the # key to enter a space.
FF6
TRS/ARS Press Hold when finished.
See figures, pg. 8-20 for instructions on entering names.
FF7
Related Programming:
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF1 0 02 0004 Hold (0 or 1) Hold
PSD Code 80-99
Extension No.
DBS 576 (USA) issued 05/20/98
FF8: Maintenance
/7 *" 
(clears current
data)
Name for PSD Code
(up to 7 char.)
Page 8-45
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B