Ff8 0 04: Card Settings - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction

FF8 0 04: Card Settings

0
Card Reset
System
Configuration
(all CPCs) - Version 1.0 or higher
Reset a card if the system cannot communicate with it.
FF1
FF8
System
FF2
Trunks
Notes:
FF3
When you reset a card, the system will display the next card. You can then reset the card in the free slot.
Extensions
Even if the display shows "0" (Not installed, or idle), you can reset the card.
If the entered card position is an EXT (extension) card, only "0" (Not installed, or idle) is available for
FF4
display.
FF-/Soft Keys
Related Programming:
FF5
Groups
Card Type Verification
(all CPCs) - Version 1.0 or higher
FF6
Verifies the existing card type. For display only (you cannot change the card type).
TRS/ARS
FF8
FF7
Applications
FF8
Notes:
Maintenance
The Card Type No. displayed will not match the card's address entry in Free Slot/Option Slot
Assignment (see 0: System Configuration). The table below shows the actual values for the displayed
Card Type No.
Appendix A
Related Programming:
Free Slot Assignment (pg. 0-5)
Appendix B Option Slot Assignment (pg. 0-6)
576-13-400
0 04 0 BSS
BSS: Card Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
0 04 1 BSS
BSS: Card Position
B=Cabinet no. 1-6
SS=Slot no. 01-14
01 (1-6) (01-12) Hold (1-99) Hold
02 (1-6) (13 or 14) Hold (50) Hold
DBS 576 (USA) issued 05/20/98
Hold (0 or 1) (Flash + Hold)
0=Not installed, or idle
(no communication).
1=Installed and busy.
00 Hold [01-99 displays]
Card Type Setting 01-99
(see table below for values)
FF8: Maintenance
 -
(press FLASH* and Hold
simultaneously)
*Not available for FLASH,
programmed via FF-key.
$

Page 8-23
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B