Table 1-6. Dial Plan A: Flexible Feature Codes At Dial Tone (Ff1 2 02) - Panasonic DBS-576 Technical Manual

Section 400-Programming
Introduction
Dial Plan A: Flexible Feature Codes at Dial Tone
(all CPCs) - Version 1.0 or higher
Define Flexible Feature Codes that can be dialed during dial tone on extensions
0
assigned to Dial Plan A.
System
Configuration
FF1 2 02 (0001-0056) Hold (max. 4-digit Code) Hold
FF1
System
FF2
Notes:
Trunks
Flexible Feature Code: A code that can be created in Programming Mode, and dialed by the end-user
to perform a feature. All features already have a Fixed Feature Code that cannot be changed or deleted;
see pg. 4-2 for a list of these codes. However, a different set of feature codes can be created for the same
FF3
features. These Flexible Codes can be changed or deleted in programming. This option allows for a
Extensions
more "transparent" phone system replacement (end-users don't have to learn a whole new set of codes
when the DBS 576 is installed; it can be tailored to match the current dial plan).
When creating Flexible Feature Codes, keep in mind the current Extension Numbering (can't start with
FF4
the same digits). These feature codes will take priority over any other intention (such as dialing an
FF-/Soft Keys
extension number) for the same dial string. Therefore, the feature codes should be unique.
Digit length of these Flexible Feature Codes must fall within the limits set in Maximum/Minimum
Dialing at Intercom Dial Tone (pg. 1-154).
FF5
Groups
Extension ports can be individually assigned to Dial Plan A or B in FF3: Extension Programming.
Related Programming:
FF6
Maximum/Minimum Dialing at Intercom Dial Tone (pg. 1-154)
TRS/ARS
Dial Plan Assignment (pg. 3-27) for digital keyphones/SLTs
Dial Plan Assignment (pg. 3-39) for S-point ISDN extensions
FF-Key Feature Assignment (Digital Keyphones, SLTs, EM24s) (pg. 4-7)
(Code) Hold
FF7
FF-Key Feature Assignment (DSS/72) (pg. 4-14)
Applications
Soft Key Feature Assignment (pg. 4-19)

Table 1-6. Dial Plan A: Flexible Feature Codes at dial tone (FF1 2 02)

FF8
Address No. Feature Description
Maintenance
0001
0002
0003
0004
Appendix A
0005
0006
Appendix B
576-13-400
Address Bin Nos. for Plan A Features
available during dial tone
(see table below for features and defaults)
Speed Dial Originate
Speed Dial Set
SLT Redial
MCO-1 trunk selection
MCO-2 trunk selection
MCO-3 trunk selection
DBS 576 (USA) issued 05/20/98
Flexible Feature Code (max. 4 digits)
valid entries: 0-9,
FF1 2 01 (0001-0024) Hold (1-4) Hold
FF3 0 BSSC 09 Hold (1 or 2) Hold
FF3 1 BSSC 08 Hold (1 or 2) Hold
FF4 1 BSSC 0 (01-72) Hold FLASH (Code) Hold
FF4 2 BSSC 0 (01-30) Hold (Code) Hold
FF1: System Programming
%  /''
and #
FF4 0 BSSC 0 (01-32) Hold FLASH

 
Default Code
  
  
 
 
  
  
  
Page 1-155
Introduction

0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
80
710
712
9
Appendix A
81
82
Appendix B