Table of Contents
Advertisement
C
C
all Transfer, Screened – to Extension
Description
Conditions
Programming References
Feature References
Operation Reference
—User Manual
C
all Transfer, Unscreened – to Extension
Description
Conditions
Programming References
Feature References
3-36
Features
Allows the extension user to voice-announce to the extension and
transfer the call.
None
Section 4, System Programming,
[990] System Additional Information, Field (1)
None
DPT Features, SLT Features;
Call Transfer — to Extension
Allows the user to transfer an intercom or outside call to directly
transfer to an extension party. After dialing the destination
extension, the user replaces the handset while hearing ringback
tone.
• If the destination party does not answer within the transfer recall time,
the call will return to the user or Operator 1. You can select the desired
one by system programming.
• This function is possible when the destination is sending ringback or
busy tone. If the destination is busy, Camp-On Transfer occurs.
• The ringing signal pattern follows the regular ringing pattern
depending on the party being transferred: outside or intercom call
ringing.
• It is possible for any extension user to transfer a call to the floating
modem.*
• If music on hold is enabled, music is sent to the caller while being
transferred. It is system-programmable whether to send ringback tone
or music on hold to the caller by program [990], Field (1).
Section 4, System Programming,
[201] Transfer Recall Time
[990] System Additional Information, Fields (1), (11)
None
3
Features
*: Available for KX-TD1232 only.
Advertisement
Table of Contents
