Seq 2.2: Controller; 1: Ctrls (Controls); Seq 3.1: Param1; 1: Midi - Korg TR Parameter Manual

Music workstation
Hide thumbs Also See for TR:
Table of Contents

Advertisement

SEQ 2.2: Controller

2.2–1: Ctrls
(Controls)
Here you can set the B-mode functions that the REALTIME
CONTROL knobs [1]–[4] and the [SW1] key, [SW2] key, will
have in Sequencer mode.
When these switches or knobs are operated during
recording, the MIDI messages that you assign here will
be recorded.
2.2–1a
2.2–1b: Knob B Assign
Here you can set the B-mode functions (mainly various con-
trol changes) that the front panel REALTIME CONTROL
knobs [1]–[4] will have in Sequencer mode (☞p.225 "Real-
time Control Knobs B Assign List").
The functions you specify here will operate when you rotate
the front panel REALTIME CONTROL knobs [1]–[4] in B-
mode.
Since the functions assigned to these knobs by the program
of each track will not be valid, you can make new assign-
ments here.
Knob1-B (Knob1-B Assign)
Knob2-B (Knob2-B Assign)
Knob3-B (Knob3-B Assign)
Knob4-B (Knob4-B Assign)
☞"Knob B Assign" (PROG 2.2–1a).
2.2–1b: SW1/2 Assign
Here you can assign functions to the front panel [SW1] and
[SW2] keys (☞p.224 "SW1, SW2 Assign List").
Since the functions assigned to these switches and knobs by
the program of each track will not be valid, you can make
new assignments here.
SW1 (SW1 Assign)
SW1 Mode
SW2 (SW2 Assign)
SW2 Mode
☞"SW 1/2 Assign" (PROG 2.2–1b).
■ 2.2–1c: UTILITY
☞"Memory Status," "Solo Selected Track," "Rename Song,"
"Delete Song," "Copy From Song," "Copy From Combi,"
"Load Template Song," "Save Template Song," "FF/REW
Speed," "Set Location" (1.1–1d)
62
2.2–1b
2.2–1c
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Off...MIDI CC#95]
[Off, ..., AfterT Lock]
[Toggle, Momentar y]
[Off, ..., AfterT Lock]
[Toggle, Momentar y]

SEQ 3.1: Param1

3.1–1: MIDI..8
(MIDI T01...08)
3.1–2: MIDI..16
(MIDI T09...16)
Here you can make MIDI-related settings for each track.
3.1–1a
1.1–1c
3.1–1(2)a: Status, MIDI Channel, Bank(EX2) MSB/
LSB
Status
This sets the status of MIDI and the internal tone generator
for each track.
INT: When the musical data recorded in the track is played
back, or when you use "Track Select" (1.1–1c) to select a
track that is set to INT and play the keyboard and operate
the controllers, the internal tone generator of this instrument
will sound, and MIDI data will not be transmitted to an
external device.
Off: The program will not sound, nor will MIDI data be
transmitted.
BTH: The operation of both INT and EXT will be per-
formed. When the musical data recorded in the track is
played back, or when you select a track that is set to BTH
and play the keyboard and operate the controllers, the inter-
nal tone generator of this instrument will sound, and at the
same time MIDI data will also be transmitted to an external
device.
EXT: When the musical data recorded in the track is played
back, or when you select a track that is set to EXT and play
the keyboard and operate the controllers, MIDI data will be
transmitted to an external device, but the internal tone gen-
erator of this instrument will not sound.
When you switch songs or reset to the beginning of the
song, tracks that are set to EXT will transmit program
change, volume, panpot, portamento, send 1, 2, post IFX
pan, and post IFX send 1, 2 MIDI messages.
EX2: "Bank Select" will be enabled. Instead of the A–g: (d)
bank numbers that can be selected on this instrument, the
bank number you specify here will be transmitted. In other
respects this is the same as EXT.
MIDI data is transmitted and received on the MIDI
channel that is specified separately for each track by
"MIDI Channel."
Recorded data
Keyboard and controller
operations
Status
Internal tone
MIDI OUT
generator
INT
×
EXT, EX2
BTH
3.1–1b
[INT, Off, BTH, EXT, EX2]
Received data
Internal tone
MIDI OUT
generator
×
×

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents