Korg TR Parameter Manual page 132

Music workstation
Hide thumbs Also See for TR:
Table of Contents

Advertisement

MFX1 Off
On (checked): MFX1 will be disabled.
Off (unchecked): The Master Effect Setup page (7.2–1)
"MFX1 On/Off" settings of Program, Combination, and
Sequencer mode will be valid.
MFX2 Off
On (checked): MFX2 will be disabled.
Off (unchecked): The Master Effect Setup page (7.2–1)
"MFX2 On/Off" settings of Program, Combination, and
Sequencer modes will be valid.
When "IFX On/Off," or "MFX1 On/Off," "MFX2 On/
Off" settings are switched, control change messages
CC#92 (effect control 2), CC#94 (effect control 4), and
CC#95 (effect control 5) will be transmitted respectively.
The transmitted data will be 0 for off, and 127 for on.
1.1–1c: Auto Arp. (Auto Arpeggiator)
Program (Auto Arp. Program)
On (checked): When a different program is selected, the
arpeggiator settings stored in that program will automati-
cally take effect.
Off (unchecked): The arpeggiator settings will not change
when the program is switched. Use this setting when you
wish to keep the same arpeggiator pattern running while
you select different program sounds.
Combi (Auto Arp. Combi)
On (checked): When a different combination is selected, the
arpeggiator settings stored in that combination will auto-
matically take effect.
Off (unchecked): The arpeggiator settings will not change
when the combination is switched. Use this setting when
you wish to keep the same arpeggiator pattern running
while you select different combination sounds.
■ 1.1–1d: UTILITY
For details on how to select the desired utility function, refer
to "PROG 1.1–1c: UTILITY."
Write Global Setting
This command writes Global mode settings (except for
Drum Kits and User Arpeggio Patterns).
1 Select "Write Global Setting" to access the dialog box.
2 To write the data, press the [F8] ("OK") key. To cancel
without writing, press the [F7] ("Cancel") key.
You can also use the [REC/WRITE] key to write data in
the same way as the "Write Global Setting" command.
Press the [REC/WRITE] key to access the "Update Glo-
bal Setting" dialog box, and press the [F8] key to write
the data.
To write a drum kit or user arpeggio pattern, execute the
appropriate utility. ( ☞ 5.1–1d "Write Drum Kits," 6.1–1d
"Write Arpeggio Patterns")
[Off, On]
Load Preload/Demo Data
This command loads the preload data and demo song data
into internal memory. ( ☞ VNL)
Before loading this data, you must uncheck the "Mem-
ory Protect" (1.1–2b) setting for the data that you want
[Off, On]
to load. If the setting is still checked when you attempt
to load the data, a dialog box will indicate "Memory
Protected," and it will not be possible to load the data.
1 Select "Load Preload/Demo Data," and access the dialog
box.
2 In the "Kind" field, select the data that you want to load.
[Off, On]
All (Preload PCG and
Demo Songs)
All Preload PCG
All Demo Songs
Program All
Program Bank
[Off, On]
Program Single
Combination All
Combination Bank
Combination Single
DrumKit All
DrumKit Single
Arpeggio Pattern All
Arpeggio Pattern Single
Global Setting
If you selected Program or Combination, move the cur-
sor down and select All, Bank, or Single to specify the
range of data that will be loaded.
All: Data for all programs or combinations will be
loaded.
Bank: Data will be loaded in units of one bank. In this
case, move the cursor down and select the bank whose
data you want to load.
Single: Data for one program or combination will be
loaded. In this case, move the cursor down to select the
data that you want to load.
If you selected DrumKit or Arpeggio Pattern, move the
cursor down and select either All or Single to specify the
range of data that will be loaded.
All: Data for all drum kits or arpeggio patterns will be
loaded.
Single: Data for one drum kit or arpeggio pattern will be
loaded. In this case, move the cursor down to select the
data that you want to load.
3 If you are loading in units of Bank or Single, use the
"To" field to select the loading destination.
4 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
All PCG (programs, combinations, drum
kits, user arpeggio patterns, global set-
tings), and demo song data
All PCG (programs, combinations, drum
kits, user arpeggio patterns, global set-
tings) data
All demo song data
All program data
All program data of a bank
Data for one selected program
All combination data
All combination data of a bank
Data for one selected combination
All drum kit data
Data for one selected drum kit
All arpeggio pattern data
Data for one selected arpeggio pattern
Global setting data
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents