KORG TR Parameter Manual Page 151

Music workstation.
Hide thumbs

Advertisement

3 If you checked "Load ********.KSC too", set ".KSC Alloca-
tion" to specify how the multisamples and samples
within the .KSC file will be loaded.
Append: The data will be loaded into the numbers after
the last multisample or sample number currently existing
in sample data RAM (i.e., that were previously sampled
or loaded). In this case, only the valid multisamples and
samples will be loaded, and will be packed without leav-
ing vacant numbers (see diagram below).
At this time, programs in the .PCG file that use multisam-
ples listed in the .KSC file will automatically have their
oscillator multisample settings remapped so that each
program uses the correct multisamples. Drum kits in the
.PCG file that uses samples listed in the .KSC file will also
have their drum kit sample settings remapped so that the
drum kit plays the correct samples.
Clear: All multisamples and samples currently existing
in sample data RAM will be cleared, and the multisam-
ples and samples will be loaded in the same configura-
tion as when they were saved (see diagram below).
If you want to load multisamples and samples from
media without erasing the multisamples and samples
that currently exist in sample data RAM, choose
Append.
If you want to reproduce the state in which the data had
been saved, for example immediately after power-on,
choose Clear.
.KSC Allocation
.KSC file to be loaded
Internal memory before
KSC000
KSC001
KSC003
Append
KSC005
KSC000
KSC001
KSC003
Clear
KSC005
4 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
144
Internal memory after
loading
loading
KSC000
KSC000
KSC002
KSC002
KSC003
KSC003
KSC004
KSC005
KSC006
KSC007
KSC000
KSC000
KSC001
KSC002
KSC003
KSC003
KSC005
2) Load Programs:
All program data from a .PCG file will be loaded.
1 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
3) Load Program Bank [A...D]:
All program data of the selected bank will be loaded into the
bank you specify.
1 In "To," select the loading destination bank.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
4) Load a Program:
Data for the selected program will be loaded into the pro-
gram number you specify.
1 If you wish to load a program other than the one already
selected, use "From" to select the program that you wish
to load.
2 In "To," select the bank and program into which the data
will be loaded.
3 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
5) Load Combinations:
All combinations in the .PCG file will be loaded.
1 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
6) Load Combination Bank [A...C]:
All combinations in the selected bank will be loaded into the
bank you specify.
1 In "To," specify the loading destination bank.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
selected icon
selected icon
selected icon
selected icon
selected icon

Advertisement

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: