Korg TR Parameter Manual page 153

song data in the .SNG file being loaded will be packed
forward. (☞p.143 ".SNG Allocation" diagram)
Select this when you want to add song data from media
without erasing the song data that currently exists in
internal memory. Cue list data will not be loaded.
Clear: All cue list data and song data currently existing in
internal memory will be erased, and the cue list data and
the song data in the state in which it was saved will be
loaded. (☞p.143 ".SNG Allocation" diagram)
Select this when you want to reproduce the saved state
immediately after power-on, etc.
2 If a .PCG file or .KSC file of the same name exists in the
current directory, you can select the "Load ********.PCG
too" and "Load ********.KSC too" check boxes.
☞"1) Load .PCG: 1 "
3 If you checked "Load ********.KSC too," set ".KSC Alloca-
tion" to specify how the multisamples and samples in the
.KSC file will be loaded.
☞"1) Load .PCG: 2 "
4 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
16) Load Cue Lists:
The cue list data in the .SNG file will be loaded.
1 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
17) Load a Song:
Data for the selected song will be loaded into the song num-
ber you specified as the load destination.
1 If you wish to load a song other than the one already
selected, use "From" to re-select the song that you wish
to load.
2 In "To," select the loading destination song.
3 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
18) Load tracks:
The selected Track file will be loaded into the song you spec-
ify as the loading destination. However, it is not possible to
specify an uncreated song as the loading destination.
1 In "To," specify the loading destination song.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
146
selected icon
selected icon
selected icon
19) Load Pattern Data:
The selected user pattern will be loaded into a user pattern
of the selected loading destination song. However, it is not
possible to specify an uncreated song as the loading destina-
tion.
1 If you wish to load a user pattern other than the one
already selected, use "From" to re-select the user pattern
that you wish to load.
2 In "To" and "Pattern," select the loading destination song
and user pattern.
3 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
20) Load Standard MIDI File:
The selected Standard MIDI File will be loaded into the song
number you select as the loading destination.
1 Use "To" to select the loading destination song.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
The program bank and program numbers loaded into
the song will follow the "Bank Map (GLOBAL 1.1–2a)
setting. If "Bank Map" is KORG, bank A will be
selected for bank select 00.00 (MSB.LSB). If "Bank Map"
is GM, bank G will be selected.
If you select an undefined file and choose "Load
selected," the file will be assumed to be a Standard
MIDI File, and the "Load Standard MIDI File" dialog
box will appear. When you execute loading, the file will
be loaded into the song that was specified as the load-
ing destination. However if the file format is inappro-
priate, the operation will be invalid and an error
message will be displayed.
21) Load and Transmit MIDI Exclusive Data:
Load all data from the .EXL file and transmit it from MIDI
OUT.
1 If the .EXL file contains two or more exclusive data items,
use "Transmit Interval Time" to specify the time interval
that will be inserted between each item of exclusive data.
If you are transmitting the data to another TR, the
required time interval will depend on the type of data.
After transmitting all .PCG data, you must allow an
interval of approximately 20 seconds. For details refer to
the Global mode section on Dump (☞GLOBAL 2.1–1c).
For other MIDI devices, refer to their owner's manual.
2 To load the data, press the [F8] ("OK") key. To cancel
without loading, press the [F7] ("Cancel") key.
selected icon
selected icon
selected icon