Seq Edit Mode - Korg minilogue Owner's Manual

SEQ EDIT mode

The parameters of the SEQ EDIT mode are assigned to buttons 1–6.
Button 1 Button 2
SEQ PARAM-
BPM
BPM Step Length
Step Resolu-
tion
Swing
Default Gate
Time
Button 1 (BPM)
BPM
This parameter sets the tempo of the Sequencer in Beats Per Minute (BPM).
Button 2 (SEQ PARAMETER)
This group provides control of various Sequencer timing and resolution pa-
rameters such as Gate Time, Swing, etc.
Step Length
Step Length allows you to set the number of steps used by the Step Sequencer.
Step Resolution
The Step Resolution is used to set the length of each Step Sequencer step.
1/16: A single step will be set to the length of a sixteenth note.
1/1: A single step will be set to the length of one measure. Use this when you
want to play long chords.
Swing
The Swing parameter adjusts the intensity of the swing.
Button 3
SEQ CLEAR
ETER
All Clear
Motion Clear
[10.0...300.0]
[1...16]
[1/16, 1/8, 1/4, 1/2, 1/1]
[−75%...+75%]
Button 4 Button 5
MOTION MOTION EN-
CLEAR
Motion 1...4 Motion 1...4
37
Button 6
MOTION
ABLE SMOOTH
Motion 1...4