2: Save - Korg TR Parameter Manual

Off (Unchecked): Of the programs used by the combina-
tions in the .PCG file or the songs in the .SNG file, only
the programs that use RAM samples will be loaded. If
you are using preset programs as well as programs that
use RAM samples, you will normally uncheck this set-
ting.
5 In the "To Combi" field, specify the loading-destination
bank and number for the combinations in the .PCG file.
When you execute, only the valid combinations will be
loaded consecutively, starting at the bank and number
you specify here.
If the loading-destination bank and number exceed
C127, loading will end automatically.
6 In the "To Prog" field, specify the loading-destination
bank and number for the programs in the .PCG file.
When you execute, only the valid programs will be
loaded consecutively, starting at the bank and number
you specify here.
If the loading-destination bank and number exceed
D127, loading will end automatically.
7 In the "To DKit" field, specify the loading-destination
bank and number for the drum kits in the .PCG file.
When you execute, only the valid drum kits will be
loaded consecutively, starting at the bank and number
you specify here.
If the loading-destination bank and number exceed 23
(User), loading will end automatically.
The specified bank/number and following will be over-
written by the Load operation. If you want to keep this
data, use "Save All" or "Save PCG" to save it.
8 Press the [F8] ("OK") key to execute loading, or press the
[F7] ("Cancel") key if you decide not to load.
1.1–2: Save
Here you can save various data from internal memory to
media such as an SD card. Use the [F5] ("UP") key and [F6]
("OPEN") key to move to the desired directory (i.e., change
the current directory), and then select the Utility menu com-
mand [F8].
When you execute a Save operation, the data will be saved
in the same level of the media hierarchy as the files that are
displayed.
The date and time with which the saved file is stamped is
specified by "Set Date/Time" (1.1–3a).
1.1–1a
1.1–1b
1.1–1c
1.1–1d
■ 1.1–2a: UTILITY
☞"Hide unknown file," "Translation" (1.1–1f)
For details on how to select the desired utility function, refer
to "PROG 1.1–1c: UTILITY."
When saving combinations with "Save All," "Save PCG
& SEQ," or "Save PCG," you should also try to save the
programs used by each timbre (and the drum kits used
by the programs) and the user arpeggio patterns at the
same time.
Similarly when saving programs, you should also save
the drum kit used by the program and the user arpeg-
gio pattern at the same time.
If multisamples or samples created in Sampling mode
(if the EXB-SMPL option is installed) are used in a pro-
gram or drum kit, we recommend that you save the
data as "Save All."
Also when using "Save PCG" or "Save Sampling Data"
to save an individual program, drum kit, or multisam-
ple or sample created in Sampling mode, we recom-
mend that you save the data in the same directory with
the same filename.
When using "Load PCG" to load a .PCG file, the .KSC
file of the same name will be loaded at the same time so
that the correct multisamples/samples with which the
program or drum kit was saved will correspond cor-
rectly.
1.1–1e 1.1–2a
151