Style/Rt Track Balance (Style Play Mode) And Song/Rt; Acc/Seq Volume Slider; Volume Of All Four Pads Assigned To The Sliders Or Pedals; Auto Select Settings Saved Into The Global - Korg PA1X Manual

8 KORG Pa1X – Operating System release 2.52

Disk Mode

This is useful if you create your own Styles, and like to dynami-
cally adjust the volume by using the sliders as a mixer. It is not
recommended with Factory Styles, each one already mixed at its
best right at the factory.
Style/RT Track Balance and Song/RT Track
Balance
The "Acc/Seq Slider" parameter has been added to the Global >
General Controls > Interface page.
Acc/Seq Slider
The ACC/SEQ VOLUME slider on the control panel can control
the volume of all Style or Song tracks, while leaving Keyboard
and Pad tracks unchanged, or act as a balance control, mixing
between the Keyboard and the Style or Song tracks.
Acc/Seq Volume
Choose this option to make the ACC/SEQ VOL-
UME slider control the volume of all Style or
Song tracks, while leaving Keyboard and Pad
tracks unchanged.
Acc/Seq-RealTime Balance
Choose this option to make the ACC/SEQ VOL-
UME slider act as a balance control, mixing
between the Keyboard and the Style or Song.
These functions are respectively called Style/RT
Track Balance and Song/RT Track Balance.
Volume of all four Pads assigned to the
sliders or pedals
The "Pad Volume" option has been added to the list of functions
that can be assigned to the Assignable Sliders or Assignable
Pedal. With this function assigned, you can control the propor-
tional volume of all four Pads at the same time.
Please note that the status of the Pad's volume, after having been
modified with a pedal or slider, is made current, and will be
saved in a Performance or STS by using the relevant Write proce-
dure.

Auto Select settings saved into the Global

The "Write Global-Auto Select Setup" command has been added
to the Global mode page menu.
Write Global-Auto Select Setup
Choose this command to save the preferred Styles, Sounds and
Performances assigned to the control panel STYLE and PER-
FORMANCE/SOUND buttons, via the Auto Select function.
This way, the next time you will turn the Pa1X on, the preferred
Styles, Sounds and Performances will be still assigned to the rele-
vant buttons.
Gbl
Disk Mode
Factory Sounds Protect parameter added
To allow overwriting of Factory Sounds, the "Factory Sounds
Protect" parameter (Disk > Preferences page) has been added.
See "Factory Sounds overwriting" on page 6 of this manual).

File overwrite procedure enhanced

When copying files, a file or folder with the same name of a
source element might be found in the target device. In this case,
Pa1X asks you if you want to overwrite it.
With previous OS version, this question was asked before start-
ing a Copy operation. Now, it is only asked if a duplicate file or
folder is met in the target device.
When a duplicate file or folder is met, the following dialog box
appears:
Auto