KORG TR Parameter Manual: Seq 7.2: Master Fx; Ifx (insert Effect); Setup

Music workstation.
Hide thumbs

Advertisement

7.1–4: IFX
(Insert Effect)
Sets the parameters for the effects selected for IFX in the
Setup page (☞p.168–).
■ 7.1–4a: UTILITY
☞"Memory Status" (1.1–1d)

SEQ 7.2: Master FX

☞For details on the master effects, refer to p.159 "7. Effect
Guide."
7.2–1: Setup
Here you can select the type of master effects, turn them on/
off, and make chain and master EQ settings.
This is the same as Program mode with the exception of
"MFX1 Control Ch," "MFX2 Control Ch," and "MEQ Con-
trol Ch." ( ☞ PROG 7.2: Ed-MasterFX)
7.2–1a
7.2–1b
7.2–1c
7.2–1a: Master FX Setup
MFX1 On/Off, MFX2 On/Off
Master Effect 1, 2
Rtn 1, 2 (Return 1, 2)
This is the same as in Program mode. Refer to "PROG 7.2–1:
Setup." However, unlike Program mode, the master effects
will be controlled by the MIDI channel specified by "MFX 1,
2 Control Ch." The control changes used are the same as in
Program mode.
MFX1, 2 Control Ch
Specifies the MIDI channel that will control dynamic
modulation (Dmod) for the master effects.
G ch: The effect will be controlled on the global MIDI chan-
nel "MIDI Channel" (GLOBAL 2.1–1a).
86
7.2–1b: Master FX Chain
MFX Chain
Direction (Chain Direction)
Signal (Chain Signal)
Level (Chain Level)
This is the same as in Program mode. Refer to "PROG 7.2–1:
Setup."
7.1–4a
7.2–1c: MEQ Ctrl
MEQ Ctrl (MEQ Control Ch)
G ch: The effect will be controlled on the global MIDI chan-
nel "MIDI Channel" (GLOBAL 2.1–1a).
7.2–1d: Master EQ Gain [dB]
Low
Mid
High
This is the same as in Program mode. ( ☞ PROG 7.2–1: Setup)
■ 7.2–1e: UTILITY
☞"Memory Status," "Solo Selected Track," "FF/REW
For details on how to select the desired utility function, refer
to "PROG 1.1–1c: UTILITY."
Copy Master Effect
☞p.28 PROG 7.2–1d
7.2–1d
7.2–1e
Note, the MIDI control channel specified in "Control Chan-
nel" of the MFX 1 and 2 pages will not be copied.
Swap Master Effect
☞p.29 PROG 7.2–1d
[Off, On]
Note, the MIDI control channel specified in "Control Chan-
nel" of the MFX 1 and 2 pages will not be swapped.
[00...89: name]
[000...127]
[Ch01...16, G ch]
[MFX1→MFX2, MFX2→MFX1]
Specifies the MIDI channel that will control dynamic
modulation (Dmod) for the master EQ.
Speed," "Set Location" (1.1–1d), "Select by Category"
(PROG 7.2–1d)
[Off, On]
[LR Mix, L Only, R Only]
[000...127]
[Ch01...16, G ch]
[–18.0...+18.0]
[–18.0...+18.0]
[–18.0...+18.0]

Advertisement

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: