Mod./P.shift; 32: St.tremolo (Stereo Tremolo); 33: St.env.tremlo (Stereo Envelope Tremolo) - Korg TR Parameter Manual

Mod./P.Shift

Other modulation and pitch shift effects
32: St.Tremolo
(Stereo Tremolo)
This effect modulates the volume level of the input signal.
The effect is stereo, and offsetting the LFO of the left and right
phases from each other produces a tremolo effect between left
and right.
Stereo In - Stereo Out
Left
Right
LFO: Tri/Sin/Vintage/Up/Down LFO Shape
LFO Wave (LFO Waveform)
Selects LFO Waveform
a
Shape (LFO Shape)
Determines how much the LFO waveform is changed
LFO Phase
b
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Sets the LFO speed
(Source)
c
Selects the modulation source of LFO speed
(Amount)
Sets the modulation amount of LFO speed
BPM/MIDI Sync
Switches between using the frequency of the LFO speed and using
the tempo and notes
BPM
Selects MIDI Clock and assigns tempo
d
Note (Base Note)
Selects the type of notes that specify the LFO speed
Times
Sets the number of notes that specify the LFO speed
Depth
Sets the depth of LFO modulation
(Source)
e
Selects the modulation source of the depth of modulation
(Amount)
Sets the modulation amount of the depth of modulation
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
f
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: LFO Wave
This parameter selects the LFO waveform. Vintg (Vintage) wave
simulates the characteristics of the tremolo created on a guitar
amplifier. Combining this effect with the Amp Simulation will
make a realistic, vintage tremolo amplifier sound.
Triangle Sine
186
Wet / Dry
Tremolo
Tremolo
Wet / Dry
LFO Phase
Tri, Sine, Vintg, Up, Down
–100...+100
☞
–180...+180deg
0.02...20.00Hz
☞
Fx:09,
Off...Tempo
–20.00...+20.00Hz
Off, On
☞
Fx:09,
MIDI, 40...240
☞
☞
☞
0...100
Off...Tempo
–100...+100
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Tremolo - LFO Waveform
Vintage Up Down
b: LFO Phase
This parameter determines the difference between the left and
right LFO phases. A higher value will simulate the auto-pan effect
in which the sound is panned between left and right.
33: St.Env.Tremlo
(Stereo Envelope Tremolo)
This effect uses the input signal level to modulate a stereo
tremolo. You can simulate a tremolo effect that becomes
deeper as it fades out while the level gets lower.
Stereo In - Stereo Out
Left
Right
+
Envelope
Envelope Sens (Envelope Sensitivity)
☞
a
Sets the envelope sensitivity of the input signal
Envelope Shape
Fx:20
b Sets the envelope curve shape of the input sig-
nal
☞
LFO Wave (LFO Waveform)
Selects LFO Waveform
c
Shape (LFO Shape)
Determines how much the LFO waveform is changed
LFO Phase
d
Sets the LFO phase difference between the left and right
Freq (LFO Frequency)
Sets the LFO speed
e
(Envelope Amount)
Sets the changes of the LFO speed according to the input signal
level
Fx:09
Depth
Sets the depth of LFO modulation
Fx:09
f
(Envelope Amount)
1...16 Sets the changes of the modulation depth according to the input sig-
Fx:09 nal level
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
g
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
e: Freq, e: (Envelope Amount), f: Depth, f: (Envelope Amount)
These parameters set the modulation via an envelope (input sig-
nal level).
The "LFO speed" is obtained by adding the "Freq" value to the
"(Envelope Amount)" value multiplied by the input signal. The
LFO modulation depth is obtained by adding the Depth value to
the "(Envelope Amount)" value multiplied by the input signal
level.
• The following example indicates that the "Depth" is 0 with an
LFO Frequency of 1.0Hz and the maximum input, and that
the "Depth" is 100 with a Frequency of 8.0 Hz with zero
input.
"Freq"=8.00 Hz, "Envelope Amount"=–7.00
"Depth"=100, "Envelope Amount"=–100
Level
Tremolo
Tremolo
LFO Phase
LFO: Tri/Sin/Vintage LFO Shape
Envelope Shape
Envelope Sens
Dry Envelope
LFO Frequency[Hz]=8.00 Hz
Envelope Amount= –7.00
Depth=100
Envelope Amount= –100
Wet / Dry
Wet / Dry
0...100
–100...+100
Tri, Sine, Vintg
–100...+100
☞
Fx:20
–180...+180deg
☞
Fx:32
0.02...20.00Hz
☞
–20.00...+20.00Hz
☞
0...100
☞
–100...+100
☞
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
Shimmer
Time