Korg TR Parameter Manual page 253

F
File already exists
Meaning: When executing a Create Directory or File
Rename operation, a directory or file of the same
name already exists on the media.
Meaning: When executing the Media mode utility menu
command "Copy" without using wild cards, the
copy destination contained a file of the same
name as the copy source.
Meaning: When you executed the Media mode utility "Save
Sampling Data" with a setting of All, All Multi-
samples, All Samples, or One Multisample, a
directory with the same name as the directory that
the TR attempted to create already existed on the
media.
Action: Either delete the existing directory or file, or spec-
ify a different filename.
File contains unsupported data
Meaning: For an AIFF file etc., you attempted to load a file
format that the TR does not support.
Action: If possible, use a computer etc. to convert the data
into a format supported by the TR, and load it.
File is read-only protected
Meaning: You attempted to write to a file or to delete a file
that had a read-only attribute.
Meaning: You attempted to save a file to an SD card that
contained a read-only file of the same name.
Action: Save the file with a different name.
File unavailable
Meaning: You attempted to load or open a file whose format
was incorrect.
File/path not found
Meaning: When loading a sample file in Media mode, the
file name specified in the dialog box for selecting a
directory hierarchy or other media did not exist in
the specified location.
Meaning: When executing the Media mode utility menu
command "Delete," the specified file did not exist.
Meaning: When executing the Media mode utility menu
command "Copy" and you used a wild card to
specify the copy file name, the specified file was
not found. Alternatively, the length of the copy
source path name exceeded 76 characters.
Meaning: In Media mode when you used the [F6] ("Open")
key to open a directory, the path length including
the selected directory name exceeded 76 charac-
ters.
Action: Check the file or directory.
Front sample data used in rear sample
Meaning: When executing the Sampling mode function
Sample Edit "Link," the sample data of the front
sample was also used by the rear sample, and
thus could not be overwritten.
Action: Do not use Overwrite; specify a different sample
as the save destination.
246
I
Illegal file description
Meaning: The filename that you specified when saving a file
Action:
Illegal SMF data
Meaning: You attempted to load a file that was not a Stan-
Illegal SMF division
Meaning: You attempted to load a Standard MIDI File that
Illegal SMF format
Meaning: You attempted to load a Standard MIDI File of a
M
Master Track can't be recorded alone
Meaning: When realtime-recording a single track, you
Action:
Measure size over limit
Meaning: When loading a Standard MIDI File, the number
Meaning: The attempted edit operation would cause the
Action:
Measure number over limit
Meaning: The attempted edit operation would cause the
Action:
Media not formatted
Meaning: When you attempted to perform a high-level for-
Action:
Medium changed
Meaning: When executing the Media mode Utility com-
Can't overwrite
or creating a directory contained invalid charac-
ters.
Change the filename you are specifying. Filena-
mes not permitted by MS-DOS cannot be used as
a filename.
dard MIDI File.
was timecode-based.
format other than 0 or 1.
attempted to begin recording with the master
track as the current track.
Begin recording with a track 1–16.
of events in a measure exceeded the maximum
(approximately 10,000 events).
maximum number of events in a measure
(approximately 10,000) to be exceeded.
Use event editing etc. to delete unwanted data.
track length to exceed 999 measures.
Delete unnecessary measures.
mat (quick format) of media, the media had not
been physically formatted yet.
Execute the Media mode utility menu command
"Format" to physically format the media (full for-
mat).
mand "Copy," the media was exchanged or
ejected, and it was not possible to copy between
separate media on the same drive.