KORG TR Parameter Manual: Various Messages

Music workstation.
Hide thumbs

Various messages

A
Are you sure?
Meaning: This message asks you to confirm execution. To
execute press the [F8] ("OK") key. To cancel, press
the [F7] ("Cancel") key.
C
Can't calibrate
Meaning: Calibration could not be performed correctly.
Action:
Try again.
Can't open pattern
Meaning: When you finished recording or editing, it was
not possible to allocate enough memory to open
the pattern that was Put into the track. (When it
must be opened automatically.) If you press the
[F8] ("OK") key, the pattern data will be deleted,
and the recorded or edited content will be saved.
If you press the [F7] ("Cancel") key, the recorded
or edited content will be discarded.
Completed
Meaning: Execution of the command ended normally.
D
Destination and source are identical
Meaning: When copying or bouncing, the same cue list,
song, track or pattern was selected for both the
source and destination.
Action:
Select a different cue list, song, track, or pattern
for the source and destination.
Destination from-measure within the limits of source
Meaning: When executing the Move Measure command for
all tracks or within the same track, the specified
destination measure is within the source range.
Action:
Set a destination measure that is outside of the
source range.
Destination is empty
Meaning: When editing, the track or pattern that was speci-
fied as the destination contains no musical data.
Action:
Select a track or pattern that contains musical
data.
Destination measure is empty
Meaning: The measure that was specified as the destination
contains no data.
Action:
Specify a destination measure that contains data.
Destination multisample already exists
Meaning: A multisample already exists at the destination
(save location) multisample.
Action:
Either delete the multisample at the destination
(save location), or change the save destination
multisample number.
Destination multisample and source multisample are
identical
Meaning: The same multisample is selected for the source
and destination.
Action:
Select different multisamples for the source and
destination.
Destination sample already exists
Meaning: A sample already exists at the destination (save
location).
Action:
Either delete the sample at the destination (save
location), or change the save destination sample
number.
Destination sample data used in source sample
Meaning: Since the sample data at the destination (save
Continue ?
location) is also used by the source sample, it can-
not be overwritten.
Action:
Without using Overwrite, specify a different sam-
ple for the destination (save location).
Destination sample is empty
Meaning: The sample for editing is empty.
Destination song is empty
Meaning: The song that was specified as the copy destina-
tion or bounce destination does not exist.
Action:
Execute the Create New Song command in the
dialog box that appears when a new song is
selected before copying or bouncing.
Directory is not empty. Cleanup director y
Meaning: You are attempting to delete a directory that still
contains files or sub-directories. If you press the
[F8] ("OK") key, the directory will be deleted
along with all files or sub-directories that it con-
tains. To cancel without deleting, press the [F7]
("Cancel") key.
E
Error in formatting medium
Meaning: An error occurred while performing a physical
format (full format) or high-level format (quick
format) of the media.
Action:
Use other media.
Error in reading from medium
Meaning: An error occurred while reading data from a
media.
Action:
Execute the reading operation once again. If the
same error occurs, it is possible that the data on
the media has been damaged.
Error in writing to medium
Meaning: An error occurred while writing data to a media.
(Verify error)
Action:
It is possible that the media has been physically
damaged. Try another media. Avoid using the
media that produced the error.
Are you sure?
245

Advertising

   Also See for KORG TR

   Related Manuals for KORG TR

   Related Content for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: