KORG TR Parameter Manual: Eg (amp1 Eg)

Music workstation.
Hide thumbs
5.1–2b: Amp Mod., LFO1 Mod., LFO2 Mod.
Indicates settings to specify how the volume of oscillator 1
will be controlled by velocity, OSC1 LFO1, and OSC1 LFO2.
Amp Mod. (Amp Modulation):
Velocity Int. (Amp Velocity Int.)
With positive (+) values, the volume will increase as you
play more strongly.
With negative (–) values, the volume will decrease as you
play more strongly.
Volume change (with positive (+) values of this parameter)
Note-on
Note-off
Softly played
LFO1 Mod. (LFO1 Modulation):
Intensity (LFO1 Intensity)
These parameters let you use "OSC1 LFO1" (5.3–1) to con-
trol the oscillator 1 volume.
Negative (–) values will invert the LFO waveform.
LFO2 Mod. (LFO2 Modulation):
Intensity (LFO2 Intensity)
Specifies the depth and direction of the effect that "OSC1
LFO2"(5.3–2) will have on the volume of oscillator 1. Refer
to the preceding sections "LFO1 Mod. (LFO1 Modulation)."
5.1–2c: AMS, Int.
AMS (Amp AMS)
Indicates the source that will control the volume of amp 1
(☞p.216 "AMS List") (EXT) Velocity cannot be selected.
Int. (AMS Intensity)
Specifies the depth and direction of the effect that "AMS
(Amp AMS)" will have.
The actual volume will be determined by summing the
value of the changes produced by the amp EG with the val-
ues of Alternate Modulation etc., and if the levels of the amp
EG are low, the modulation applied by Alternate Modula-
tion will also be less.
For example, if you set "AMS (Amp AMS)" to AfterT and
press down on the keyboard, the volume will increase if you
have set this parameter to a positive (+) value. However if
the volume is already at maximum due to the EG settings
etc., it will not be possible to increase the volume any fur-
ther. If you have set this parameter to a negative (–) value,
pressing down on the keyboard will decrease the volume.
AMS (LFO1 AMS)
Indicates the source that will control the depth by which
"OSC1 LFO1" (5.3–1) will modulate the volume of oscillator
1 (☞p.216 "AMS List").
Int. (AMS Intensity)
Specifies the depth and direction of the effect that "OSC1
LFO1" will have on the volume of oscillator 1. Negative (–)
values will invert the LFO waveform.
20
[–99...+99]
Note-on
Note-off
Strongly played
[–99...+99]
[–99...+99]
[Off, (PEG, FEG, EXT)]
[–99...+99]
[Off, (PEG, FEG, AEG, KT, EXT)]
[–99...+99]
AMS (LFO2 AMS)
[Off, (PEG, FEG, AEG, KT, EXT)]
Indicates the source that will control the depth by which
"OSC1 LFO2" (5.3–2) will modulate the volume of oscillator
1 (☞p.216 "AMS List").
Int. (AMS Intensity)
Specifies the depth and direction of the effect that "OSC1
LFO2" will have on the volume of oscillator 1. Negative (–)
values will invert the LFO waveform.
■ 5.1–2d: UTILITY
☞"Write Program" (1.1–1c), "Copy Oscillator," "Swap
Oscillator" (2.1–1d)
5.1–3: EG
(Amp1 EG)
Indicates settings to specify how Amp 1 will cause the vol-
ume of oscillator 1 to change over time.
5.1–3a
5.1–3b
5.1–3a: Amp1 EG
These parameters specify how the amp 1 EG will change
over time.
L (Level):
S (Start Level)
Specifies the volume level at note-on.
If you want the note to begin at a loud level, set this to a high
value.
A (Attack Level)
Specifies the volume level that will be reached after the
attack time has elapsed.
B (Break Point Level)
Specifies the volume level that will be reached after the
decay time has elapsed.
S (Sustain Level)
Specifies the volume level that will be maintained from after
the slope time has elapsed until note-off occurs.
Time:
A (Attack Time)
Specifies the time over which the volume will change after
note-on until it reaches the attack level.
If the start level is 0, this will be the rise time of the sound.
D (Decay Time)
Specifies the time over which the volume will change from
when it reaches the attack level until it reaches the break
point level.
S (Slope Time)
Specifies the time over which the volume will change from
when it reaches the break point level until it reaches the sus-
tain level.
[–99...+99]
5.1–3c
5.1–3d
[00...99]
[00...99]
[00...99]
[00...99]
[00...99]
[00...99]
[00...99]

Advertising

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: