KORG TR Parameter Manual: Realtime Control Knobs B Assign List; Knob 1...4 B Assign

Music workstation.
Hide thumbs
Knob 1...4 B Assign
The following functions can be assigned to the REALTIME
CONTROLS [1]–[4] knobs in B-mode.
• For program, combination, or song, make these settings
in 2.2: Ed-Ctrl/Controller page "Knob B Assign" (2.2–
1a).

Realtime Control Knobs B Assign List

Off
No function
Knob Mod. 1 (CC#17)
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM1#17 for "AMS," or Kb1#17 for "Dmod Src." Simultaneously, CC#17 will be transmitted.
Knob Mod. 2 (CC#19)
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM2#19 for "AMS," or Kb2#19 for "Dmod Src." Simultaneously, CC#19 will be transmitted.
Knob Mod. 3 (CC#20)
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM3#20 for "AMS," or Kb3#20 for "Dmod Src." Simultaneously, CC#20 will be transmitted.
Knob Mod. 4 (CC#21)
General purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select KnobM4#21 for "AMS," or Kb4#21 for "Dmod Src." Simultaneously, CC#21 will be transmitted.
Master Volume
Control the volume. Simultaneously, the universal system exclusive message Master Volume [F0H, 7FH, nn, 04,
01, vv, mm, F7H] will be transmitted to adjust the volume of all tracks or timbres (while preserving the volume bal-
ance between tracks or timbres).
Porta. Time (CC#05)
Control the portamento time. Simultaneously, CC#5 will be transmitted.
Volume (CC#07)
Control the volume. Simultaneously, CC#7 will be transmitted.
IFX Pan (CC#08)
Control the panning after the insertion effect. Simultaneously, CC#8 will be transmitted.
Pan (CC#10)
Control the oscillator panning. Simultaneously, CC#10 will be transmitted.
Expression (CC#11)
Control the expression. Simultaneously, CC#11 will be transmitted.
FX Ctrl 1 (CC#12)
Control Effect Dynamic Modulation. When controlling this, set "Dmod Src" to FX1#12. Simultaneously, CC#12 will
be transmitted.
FX Ctrl 2 (CC#13)
Control Effect Dynamic Modulation. When controlling this, set "Dmod Src" to FX2#13. Simultaneously, CC#13 will
be transmitted.
Flt Cutoff (CC#74)
Control the cutoff frequency of the Filter (low pass filter). Simultaneously, CC#74 will be transmitted.
Flt Reso. (CC#71)
Control the resonance of the Filter, or the cutoff frequency of the high pass filter. If the program's "Type (Filter1/2
Type)" is Low Pass Resonance, the resonance level will be controlled. If it is Low Pass & High Pass, the cutoff
frequency of the high pass filter will be controlled. Simultaneously, CC#71 will be transmitted.
Flt EG Int. (CC#79)
Control the EG intensity of the Filter. Simultaneously, CC#79 will be transmitted.
F/A Attack (CC#73)
Control the EG attack of the Filter and Amplifier. Simultaneously, CC#73 will be transmitted.
F/A Decay (CC#75)
Control the EG decay time and slope time of the Filter and Amplifier. Simultaneously, CC#75 will be transmitted.
F/A Sus. (CC#70)
Control the EG sustain level of the Filter and Amplifier. Simultaneously, CC#70 will be transmitted.
F/A Rel. (CC#72)
Control the EG release time of the Filter and Amplifier. Simultaneously, CC#72 will be transmitted.
P LFO1 Spd (CC#76)
Control the frequency of LFO1. Simultaneously, CC#76 will be transmitted.
P LFO1 Dep (CC#77)
Control the LFO1 intensity of the pitch. Simultaneously, CC#77 will be transmitted.
P LFO1 Dly (CC#78)
Control the delay of LFO1. Simultaneously, CC#78 will be transmitted.
SW 1 Mod. (CC#80)
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control
these, set "AMS" or "Dmod Src" to SW 1 #80. Simultaneously, CC#80 will be transmitted.
SW 2 Mod. (CC#81)
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To control
these, set "AMS" or "Dmod Src" to SW 2 #81. Simultaneously, CC#81 will be transmitted.
Foot SW (CC#82)
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select FootSW#82 for "AMS," or FSW#82 for "Dmod Src." Simultaneously, CC#82 will be transmitted.
MIDI CC#83 (CC#83)
General-purpose controller. Alternate Modulation or Effect Dynamic Modulation can be controlled. To use this,
select MIDI CC#83 for "AMS," or CC#83 for "Dmod Src." Simultaneously, CC#83 will be transmitted.
MFX Send 1 (CC#93)
Control the send level to Master Effect1. Simultaneously, CC#93 will be transmitted.
MFX Send 2 (CC#91)
Control the send level to Master Effect2. Simultaneously, CC#91 will be transmitted.
MIDI CC#00...CC#95
The specified MIDI control change (CC#) will be transmitted. If this instrument is set so as to be controlled by the
control change message, the corresponding control will occur.
• In Sampling mode (when the EXB-SMPL option is
installed), assign the functions in the 5.2: Controller/
Controls page setting "Knob B Assign" (5.2–1a).
This can be set for each program in Program mode,
each combination in Combination mode, and each song
in Sequencer mode. For Sampling mode, the settings
apply to the entire mode.
225

Advertising

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: