Gate; Gate Lane; Gate Lane Step; Step Seq - Korg wavestate Owner's Manual

Wave Sequencing 2.0

Gate

[Truncate, Scale Shape]
Scale Shape: the shape is scaled in time by the Gate Length (as well as the Timing Step Duration). For example, if Gate
Length is 50%, the "ADSR" shapes will play twice as fast. Use this to create more variation in the generated shapes.
Truncate: the shape is scaled in time only by the Timing Step Duration. If Gate Length is less than 100%, the end of the
shape is truncated.
Gate
This controls how long the Step sounds, as a percentage of the duration from the Timing Lane.

Gate Lane

Preset, Start, End, Loop Start, Loop End, Repeats
See "Front-Panel Lane Controls" on page 21.

Gate Lane Step

Step
See "Step" on page 23.
Gate Length
[0...100%]
This controls the length of time that the step will sound, as a percentage of the Timing Lane Step Duration.
Probability
[0...100%]
See "Step Probability" on page 21.

Step Seq

This Lane generates a modulation source to control other synthesis parameters, just like envelopes, LFOs, etc.

Step Seq Lane

Preset, Start, End, Loop Start, Loop End, Repeats
See "Front-Panel Lane Controls" on page 21.
Use Shape
[Off, On]
When this is On, non-zero values will be scaled by the Shape Lane.

Step Seq Lane Step

Step
[A1...D16]
See "Step" on page 23.
Type
[Value + Continuous Mod, Value * Random +/-, Value * Random +, Value + S & H Mod]
Value + Continuous Mod: The Step uses the programmed value, and modulation continuously affects the value. For
instance, if an LFO is modulating Value, you'll hear the LFO's shape during the step.
Value * Random +/-: The Step's Value is scaled by a bipolar random amount. The result may be either positive or
negative.
28