KORG TR Parameter Manual: Program Mode; Prog Page Menu; Prog 1.1: Play; Program

Music workstation.
Hide thumbs
PROG PAGE MENU
Use the following procedure to select the desired page from
within the current mode.
1 Press the [MENU] key to access the "PAGE MENU."
The "PAGE MENU" will show an abbreviated name for
each page.
2 Use the [F1]–[F7] keys at the bottom of the page to select
the desired page. Pressing the same key repeatedly will
scroll through the various sub-pages. You can also move
by using the cursor keys [
3 Press the [F8] ("Open") key to access the page.
4 If the selected page contains two or more tab pages, press
the nearest [F1]–[F7] key below the tabs to select the
desired page.
Other ways to select a page
• You can also move to the desired page by holding down
the [MENU] key and using numeric keys [0]–[9] to enter
a two-digit page number. For example if you wish to
access the 5.3: Ed-LFOs page, hold down the [MENU]
key and consecutively press numeric keys [5] and then
[3].
• By holding down the [MENU] key and using the cursor
keys [
](–) or [
](+), you can step through the pages
forward or backward in the order of 1.1→2.1→2.2→3.1,
etc.
Play
1.1: Play
Select and play programs. Use the Per-
formance Editor for easy editing, and to
do simple editing of arpeggio patterns.
(☞p.1)
Basic
2.1: Ed-Basic
Set basic program parameters such as
Oscillator and Multisample. (☞p.5)
Ctrl
2.2: Ed-Ctrl
Controller settings. (☞p.9)
Pitch
3.1: Ed-Pitch
Pitch settings. Pitch EG settings.
(☞p.10)
Flt1
4.1: Ed-Filter1
Filter 1 (tone) settings. Filter EG set-
tings. (☞p.13)
Flt2
4.2: Ed-Filter2
Filter 2 (tone) settings. Filter EG set-
tings. (☞p.18)
Amp1 5.1: Ed-Amp1
Amp 1 (volume) settings. Amp EG, pan
(position) settings. (☞p.18)
Amp2 5.2: Ed-Amp2
Amp 2 (volume) settings. Amp EG, pan
(position) settings. (☞p.22)
LFO
5.3: Ed-LFOs
Type and speed settings etc. for the
two LFOs provided for each oscillator.
(Make settings in the pitch, filter, and
amp pages to specify the depth of the
LFO settings you make here.) (☞p.22)
Arp
6.1: Ed-Arp.
Arpeggiator settings. (Shared with 1.1:
Play parameters. You may edit either.)
(☞p.24)
IFX
7.1: Ed-InsertFX
Select the BUS and master effect send
level for the oscillator output.
Insert Effect routing, selection and set-
tings. (☞p.26)
MFX
7.2: Ed-MasterFX
Master Effect selection and settings.
Master EQ settings. (☞p.28)

1. Program mode

], [
], [
], [
].
PROG 1.1: Play
In this display page you can select and play programs.
All MIDI data in PROG 1.1: Play is transmitted and
received on the Global MIDI Channel (☞GLOBAL 2.1–
1a).
1.1–1: Program
1.1–1a
1.1–1b
1.1–1a: Bank, Program Select, Category, Cat. Hold,
10's Hold, (Tempo)
Bank
This is the program bank display.
Use the BANK [A]–[GM] keys to select the bank.
Bank G will toggle between the GM and g(d) banks each
time you press the BANK [GM] key.
G→g(d)→G→g(d)→G...
The TR provides rewritable banks A, B, C, and D, each con-
taining 128 programs (total 512). As for non-rewritable pro-
gram areas, it provides banks G (capital programs for GM),
and bank g(d) (drums). ( ☞ For a list of the factory-set pro-
grams, refer to the separate VNL included on the CD-ROM.)
Bank A
Bank B
for preloaded programs
Bank C
Bank D
Bank G
GM capital program
Bank g(d)
GM drums program
1.1–1c
[Bank A...D, G, g(d)]
1

Advertising

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: