KORG TR Parameter Manual: Controlling The Master Effects Via Midi; Master Eq; Individual Outputs

Music workstation.
Hide thumbs
4. Controlling the Master Effects via
MIDI
You can use the Dynamic Modulation (Dmod) function to
control all Master Effects parameters in real-time from this
instrument's controllers or from an external MIDI sequencer.
In Program mode, the parameters are controlled on global
MIDI channel "MIDI Channel" (GLOBAL 2.1–1a).
In Combination mode, and Sequencer mode, you can set
the control channels for MFX1 and MFX2 using the Setup
page "Control Channel" parameters of the "MFX1–2" tabs.
Select the desired option from Ch01–16, and Gch.
Ch01–16: Select this option if you wish to control the param-
eters for each Master Effect on different channels.
Gch: Select this option if you wish to control the parameters
on global MIDI channel "MIDI Channel" (GLOBAL 2.1–1a).
This is the normal setting.
Program mode
Effect / Mixer Block Diagram in Program Mode
IFX / Indiv.Out
Pan
BUS Select
Oscillator 1
BUS Select
= IFX
Oscillator 2
BUS Select
AUDIO INPUT 1
= L/R
BUS Select
AUDIO INPUT 2
= IFX
GLOBAL 1.1: System Audio In*
(Input1,2)
Select from:
L/R
IFX
1
2
1/2
Off
*1: Sold separately EXB-SMPL option is installed
166
PROG 7.1: Insert Effect
1
Insert Effect
stereo
IFX
IFX BUS
mono x 2
The Master EQ (stereo, three-band EQ) is located right
before AUDIO OUTPUT (MAIN) L/MONO, R. Low and
High EQs are of the shelving type, and Mid EQ is a peaking
type equalizer. You can control the Low Gain and High Gain
parameters using the Dynamic Modulation function.
The Master EQ (stereo, three-band EQ) is applied to the sig-
nal input from the L/R bus. For more information on the
parameters, p.213.
Individual Outputs
The TR is equipped with two individual AUDIO OUTPUTs
(INDIVIDUALs). You can route the oscillator (Program),
timbre (Combination), and track (Sequencer) output or the
post-IFX signals to these two individual outputs.
Use "BUS Select" (7.1–1a) in Program, Combination, or
Sequencer mode to route the oscillators (Program), timbres
(Combination), or tracks (Sequencer) to AUDIO OUTPUTs
(INDIVIDUAL).
If you are using the Insert Effects, use "BUS Select" of the
7.1: Ed–InsertFX (or Insert FX), and Setup page to route the
post-IFX signals.
1, 2: Monaural signals are routed to AUDIO OUTPUTs
(INDIVIDUAL).
1/2: Stereo signals are routed to AUDIO OUTPUTs (INDI-
VIDUAL).
Send1
Send2
GLOBAL 1.1: System Audio In*
(Send1,2 on Input1, 2)
Post IFX
Post IFX
Pan(CC#8)
BUS Select
Send1 / 2
BUS Select
= L/R
Select from:
L/R
1
2
1/2
Off
Chain
mono
mono
mono x2
Master EQ
PROG 7.2: Master Effect
L/R BUS
1
Master EQ
stereo
Master Effects
Return1 / 2
MFX1
stereo
MFX2
stereo
AUDIO OUTPUT
(MAIN) L/MONO, R
AUDIO OUTPUT
(INDIVIDUAL)1/2

Advertising

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: