KORG TR Parameter Manual Page 250

Music workstation.
Hide thumbs

Advertisement

Recording the arpeggiator or RPPR function on an
external MIDI sequencer/computer
When the arpeggiator is on, playing the keyboard or operat-
ing the controllers of the TR will operate and control the
arpeggiator. The arpeggiator will operate and be controlled
in the same way in response to MIDI messages received at
MIDI IN. The MIDI messages generated from the arpeggia-
tor will be transmitted from MIDI OUT according to the
Local Control setting ("Local Control On" GLOBAL 2.1–1a)
as described below.
In Sequencer mode, when the RPPR function is on, playing
the keyboard will cause RPPR to operate. Similarly, the
RPPR function will also operate in response to notes
received on the MIDI channel of the track selected by "Track
Select" (SEQ 1.1–1c). Notes will be transmitted by RPPR
from MIDI OUT according to the local control setting
("Local Control On") as described below.
Local Control On: Notes from the arpeggiator or RPPR will
be transmitted from MIDI OUT. Normally you will use this
setting.
Local Control Off: Notes from the arpeggiator or RPPR will
not be transmitted from MIDI OUT. The arpeggiator or
RPPR will only sound the notes (on this instrument).
Setting example 1
Record the note messages generated by the arpeggiator or
RPPR function on the external MIDI sequencer/computer
Turn on this instrument's arpeggiator or RPPR function. Set
this instrument to Local Control On.
Turn Local Control On for this instrument.
Turn Echo Back Off on your external sequencer/computer.
By turning echo back off, you will prevent the arpeggiator or
RPPR function from performing duplicate processing on the
monitored notes during recording.
During playback, turn off the arpeggiator and RPPR func-
tions of this instrument.
Setting example 2
Use the external MIDI sequencer/computer to record only
the notes that trigger the arpeggiator or RPPR function,
and operate this instrument's arpeggiator or RPPR func-
tion for monitoring while recording, and during playback.
Turn on the TR's arpeggiator or RPPR function. Set the TR to
Local Control Off. The note messages generated by the
arpeggiator or RPPR function will not be output. On your
external MIDI sequencer/computer, turn echo back on.
With these settings, the data will be recorded and played
correctly, and the arpeggiator or RPPR function will not be
applied in duplicate.
About GM/GS/XG
the TR supports the GM standard. It also supports the GM
sound map (including bank select) with 128 programs and 9
drum programs provided in ROM banks G, and g(d). (g(d)
contains drum programs.)
GM is a standard that ensures basic compatibility of sounds
etc. between different GM-compatible instruments made by
different manufacturers, but you need to be aware of the fol-
lowing.
• The GM System On message is received only in
Sequencer mode. ("GM Initialize" SEQ 1.1–1d)
Roland GS and Yamaha XG are specifications by which these
respective manufacturers have extended the GM standard.
the TR automatically converts the GS/XG sound maps to
the GM sound map, and supports some of their messages. In
Sequencer mode etc., GS/XG music data can be played
back.
Since the TR does not support all of the GS/XG sound
maps or messages, some data may not be played back
correctly.
If you wish to play music data from an external GM/GS/XG
compatible sequencer, or to load it into a pattern (multi), set
"Bank Map" (GLOBAL 1.1–2a) to GM.
Converting the GS/XG bank/program maps to the
GM2 bank/program map
• When bank select/program change messages used by
GS/XG are received, they will automatically be
converted to the G, g(d) bank/program map of this
instrument.
• The same conversion is performed when a SMF is
loaded into a song in Media mode.
For banks that are used in common by GS/XG, GS
Reset/XG System ON will be received to automatically
convert to the optimal bank/program map for each.
Support for GS/XG part mode exclusive messages
• In Sequencer mode when GS/XG part mode exclusive
messages Drum or MDrm 1–4 are received, bank g(d)
(GM drum bank) will be selected for the specified track.
Until this part mode state is defeated, bank select
messages will no longer be received for the specified
track.
• When an SMF is loaded into a song in Media mode, any
bank select messages in a track that is set to a part mode
of Drum or MDrm 1–4 will be ignored, and will not be
loaded.
Support for NRPN messages used in GS/XG music
data
The following NRPN messages can be received to modify
the sound.
Vibrato Rate
[Bn, 63, 01, Bn, 62, 08, Bn, 06, mm]
Vibrato Depth
[Bn, 63, 01, Bn, 62, 09, Bn, 06, mm]
Vibrato Delay
[Bn, 63, 01, Bn, 62, 0A, Bn, 06, mm]
Filter Cutoff
[Bn, 63, 01, Bn, 62, 20, Bn, 06, mm]
Resonance
[Bn, 63, 01, Bn, 62, 21, Bn, 06, mm]
EG Attack Time
[Bn, 63, 01, Bn, 62, 63, Bn, 06, mm]
EG Decay Time
[Bn, 63, 01, Bn, 62, 64, Bn, 06, mm]
EG Release Time
[Bn, 63, 01, Bn, 62, 66, Bn, 06, mm]
Drum Filter Cutoff
[Bn, 63, 14, Bn, 62, kk, Bn, 06, mm]
Drum Filter Resonance
[Bn, 63, 15, Bn, 62, kk, Bn, 06, mm]
Drum EG Attack Time
[Bn, 63, 16, Bn, 62, kk, Bn, 06, mm]
Drum EG Decay Time
[Bn, 63, 17, Bn, 62, kk, Bn, 06, mm]
Drum Coarse Tune
[Bn, 63, 18, Bn, 62, kk, Bn, 06, mm]
Drum Fine Tune
[Bn, 63, 19, Bn, 62, kk, Bn, 06, mm]
Drum Volume
[Bn, 63, 1A, Bn, 62, kk, Bn, 06, mm]
Drum Panpot
[Bn, 63, 1C, Bn, 62, kk, Bn, 06, mm]*
Drum Rev Send (Send2)
[Bn, 63, 1D, Bn, 62, kk, Bn, 06, mm]
Drum Cho Send (Send1)
[Bn, 63, 1E, Bn, 62, kk, Bn, 06, mm]
kk: Drum Inst No. ([0C...6C] corresponds to C0...C8)
*
[00, 01...7f] corresponds to Random, L000...R127)
243

Advertisement

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: