1.1–4: Media Information
1.1–4a: Media (Media select)
This displays information on the media that is selected by
☞1.1–1c: Media select
Vol. Label (Volume Label):
The volume label of the media.
The speciﬁed SCSI ID. If the TR's internal SD card slot is
selected, "–" will be displayed.
Dev. Type (Device Type):
The type of media.
The vendor ID, product, and product version, etc.
Format (Format Type):
The type of format. If not formatted, this will indicate
The capacity of the media (in bytes).
The free capacity of the media (in bytes).
The write protect status of the media. This will indicate
"On" if protected, or "Off" if not protected.
Removable (Supports Removable):
This will indicate "Yes" if the media of the selected device
can be removed (e.g., SD card, MO disc, removable hard
disk). If the media is ﬁxed, this will be "No."
■ 1.1–4b: UTILITY
Scan SCSI device
This command allows you to re-mount a connected SCSI
device if the EXB-SMPL option is installed.
1 From the Utility menu, select "Scan SCSI device."
The currently-connected SCSI devices will be re-scanned
(if the EXB-SMPL option is installed). Once scanning is
completed, any valid SCSI device can be selected in
Never connect or disconnect a SCSI cable while the
power of the TR or of a SCSI device is turned on. Doing
so can cause irreparable malfunctions.