KORG TR Parameter Manual: Os1lfo (osc1 Lfo); Osc2

Music workstation.
Hide thumbs
range of pitch change produced by the pitch EG in a range
of ±1 octave (☞p.218). As you play more softly, the pitch
change will draw closer to the pitch EG levels.
Pitch change (level)
Note-on
Note-on
Note-off
Note-off
Strongly played with
Softly played
(Intensity (Pitch EG) setting)
a positive (+) value
"Intensity" and "AMS (Pitch EG AMS)" will be
summed to determine the depth and direction of the
pitch modulation applied by the pitch EG.
3.1–1c: Portamento
This turns the portamento effect (smooth change in pitch
from one note to the next) on/off, and specifies how it will
be applied. If [SW 1] or [SW2] are set to Porta.SW(CC#65),
turning SW1 or SW2 on/off will apply portamento (☞p.216
"AMS List," p.224 "SW1, SW2 Assign List," Prta.SWCC#65).
Portamento will also be switched when CC#65 (Porta-
mento SW) is received.
Enable (Porta. Enable)
On (checked): Portamento will be applied.
Off (unchecked): Portamento will not be applied.
Fingered (Porta. Fingered)
This parameter is available when "Enable (Porta. Enable)" is
checked.
On (checked): Portamento will be applied when you con-
tinue holding the previous note as you press the next note
(legato playing).
Off (unchecked): Portamento will always be applied,
regardless of how you play.
Time (Porta. Time)
This parameter is available when "Enable (Porta. Enable)" is
checked.
This sets the portamento time. Increasing the value will pro-
duce a slower change in pitch.
■ 3.1–1d: UTILITY
☞"Write Program" (1.1–1c), "Copy Oscillator," "Swap
Oscillator" (2.1–1d)
3.1–2: OS1lfo
(OSC1 LFO)
Specifies the amount of pitch change produced by LFO1 and
LFO2 for oscillator 1.
3.1–2a
3.1–2a: Pitch LFO1/2 Modulation
LFO1:
Intensity (LFO1 Intensity)
Note-on
Note-off
Specifies the depth and direction of the pitch modulation
applied by the OSC 1 LFO1 settings you made in
"OS1LFO1" page (5.3–1).
With a setting of 12.00, a maximum of ±1 octave of pitch
modulation will be applied. Negative (–) values will invert
Strongly played with a
the LFO waveform.
negative (–) value
JS+Y Int. (LFO1 JS+Y Int.)
Specifies the depth and direction of the effect that joystick
movement in the +Y direction (away from yourself) will
have on the pitch modulation applied by the OSC1 LFO1.
As this value is increased, moving the joystick in the +Y
direction will cause the OSC1 LFO1 to produce deeper pitch
modulation. With a setting of 12.00 a maximum of ±1 octave
of pitch modulation will be applied. Negative (–) values
will invert the LFO waveform.
AMS (LFO1 AMS)
Indicates the source that will control the depth of pitch mod-
ulation produced by the OSC1 LFO1 (☞p.216 "AMS List").
Intensity (AMS Intensity)
[Off, On]
Specifies the depth and direction of the effect that "AMS
(LFO1 AMS)" will have.
With a setting of 0, modulation will not be applied. With a
setting of 12.00, the OSC1 LFO1 will apply a maximum of ±1
[Off, On]
octave of pitch modulation. Negative (–) settings will invert
the LFO waveform.
For example if "AMS" is set to AfterT and you apply pres-
sure to the keyboard, a positive (+) setting of this parameter
will cause the pitch modulation created by OSC1 LFO1 to be
applied with the normal phase, and a negative (–) setting
will cause the LFO to be applied with inverted phase.
The "Intensity (LFO1 Intensity)," "JS+Y Int. (LFO1 JS+Y
Int.)" and "AMS (LFO1 AMS)" settings will be added to
determine the depth and direction of the pitch modulation
[000...127]
applied by OSC1 LFO1 (☞p.218).
LFO2:
Intensity (LFO2 Intensity)
JS+Y Int. (LFO2 JS+Y Int.)
AMS (LFO2 AMS)
Intensity (AMS Intensity)
Refer to the preceding section "LFO1."
■ 3.1–2b: UTILITY
☞"Write Program" (1.1–1c), "Copy Oscillator," "Swap
Oscillator" (2.1–1d)
3.1–3: OSC2
Specifies how the key position (on the keyboard) will affect-
the pitch of oscillator 2, and selects the controller that will
affect the pitch and specify the depth of control. Here you
can also specify the amount of pitch change produced by the
3.1–2b
pitch EG, and set the portamento mode and on/off status.
For details on each parameter, refer to the preceding "3.1–1:
OSC1."
[–12.00...+12.00]
[–12.00...+12.00]
[Off, (PEG, FEG, AEG, KT, EXT)]
[–12.00...+12.00]
[–12.00...+12.00]
[–12.00...+12.00]
[Off, (PEG, FEG, AEG, KT, EXT)]
[–12.00...+12.00]
11

Advertising

   Also See for KORG TR

   Related Manuals for KORG TR

Comments to this Manuals

Symbols: 0
Latest comments: