Power Save Function; Battery Type And Remaining Power; Auto Power Off Function - Korg RK-100S Owner's Manual

RK-100S Owner's manual

Power save function

When the RK-100S is being powered by batteries, the power
save function will automatically turn off the display and
LEDs depending on the remaining battery power level.
Note: With the factory settings, the power save function
is Off.
1. Hold down the SHIFT button and press the favorites
F button.
The setting for the power save
function appears in the display.
2. Use the OCTAVE +/- buttons or
the SOUND lever to select the
setting.
on: Enabled
oFF: Disabled
3. Press the SHIFT button to exit the shift function.

Battery type and remaining power

This allows you to select the type of battery to be used.
In addition, the remaining power level of the batteries
currently being used can be checked.
If the selected type is different from the type of batteries
being used, the remaining amount of battery power
will not be correctly indicated.
1. Hold down the SHIFT button and press the favorites
G button.
The battery type appears in the
display.
The eight favorites buttons (A
– H) are lit up to indicate the
remaining battery power level.
The number of lit buttons may be
lower depending on the battery capacity.
New batteries: All buttons lit
Low remaining battery power level: Only button A lit
Time to replace batteries: Button A blinks
When the AC adapter is connected, all buttons are
turned off.
2. Use the OCTAVE +/- buttons or the SOUND lever to
select the battery type.
AL.: Alkaline batteries
ni.H: Nickel-metal hydride batteries
3. Press the SHIFT button to exit the shift function.
16

Auto power off function

The RK-100S is equipped with an auto power off function.
With this function, the RK-100S automatically turns off
(low power consumption state) if there is no use for
approximately four hours.
If the RK-100S has been automatically turned off with the
auto power off function, it cannot be turned on by pressing
a button or keyboard key or using a ribbon controller. Turn
the RK-100S on again.
Note: With the factory settings, the auto power off func-
tion is enabled.
1. Hold down the SHIFT button and press the favorites
H button.
The setting for the auto power off
function appears in the display.
2. Use the OCTAVE +/- buttons or
the SOUND lever to select the
setting.
4hr: Enabled
diS: Disabled
3. Press the SHIFT button to exit the shift function.