Ipv6 Icmp-Error - H3C S3100 Series Command Manual

Command Manual (For Soliton) – IPv6 Management
H3C S3100 Series Ethernet Switches
Description
Use the ipv6 host command to configure the mapping between host name and IPv6
address.
Use the undo ipv6 host command to remove the mapping between host name and
IPv6 address.
Each host name can correspond to only one IPv6 address. A newly configured IPv6
address will overwrite the previous one.
Related commands: display ipv6 host.
Examples
# Configure the mapping between host name and IPv6 address.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ipv6 host aaa 2001::1

1.1.19 ipv6 icmp-error

Syntax
ipv6 icmp-error { bucket bucket-size | ratelimit interval }*
undo ipv6 icmp-error
View
System view
Parameters
bucket-size: Number of tokens in a token bucket, in the range of 1 to 200. The default
value is 10.
interval: Update period of the token bucket in milliseconds, in the range of 0 to
2,147,483,647.
Description
Use the ipv6 icmp-error command to configure the maximum number of IPv6 ICMP
error packets sent within a specified time.
Use the undo ipv6 icmp-error command to restore the update period and the capacity
of the token bucket to the defaults.
By default, the size is 10 and the update period is 100 milliseconds. That is, at most 10
IPv6 ICMP error packets can be sent within 100 milliseconds.
Chapter 1 IPv6 Configuration Commands
1-27