Attaching The Mounting Brackets To The Switch; Mounting The Switch On A Rack - ZyXEL Communications XS3800-28 User Manual

2.3.3 Atta c hing the Mo unting Bra c ke ts to the Switc h
1
Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket with
the screw holes on the side of the Switch.
Attaching the Mounting Brackets
Fig ure 8
2
Using a #2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes into
the Switch.
3
Repeat steps
4
You may now mount the Switch on a rack. Proceed to the next section.
2.3.4 Mo unting the Switc h o n a Ra c k
1
Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining up
the two screw holes on the bracket with the screw holes on the side of the rack.

Mounting the Switch on a Rack

Fig ure 9
Chapter 2 Hardware Installation and Connection
1 and 2 to install the second mounting bracket on the other side of the Switch.
XS3800-28 User's Guide
36