Switch Access And Login - ZyXEL Communications XS1930-12F User Manual

10/12-port multi-gigabit/sfp+ smart managed l2 switch 12-port multi-gigabit smart managed poe switch
Table of Contents

Advertisement

51.2 Switch Access and Login

I forgot the IP address for the Switch.
The default IP address is http://DHCP-assigned IP (when connecting to a DHCP server) or 192.168.1.1.
1
Use the NCC (Nebula Control Center) or the ZON utility to find the IP address. The Switch must be
2
registered and added to a site in Nebula in order for it to be managed using Nebula.
If the Switch is removed from a site in Nebula, all the settings in the configuration file are reset to the
3
Nebula factory defaults except for the IP address. If you changed the default dynamic IP address to a
static IP address while the Switch was in a site in Nebula, the Switch will retain that static IP address after
you remove it from the site in Nebula.
If this does not work, you have to reset the device to its factory defaults. See
4
I forgot the user name and/or password.
The default user name is admin and the default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address is
192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the Switch.
Check the hardware connections, and make sure the LEDs are behaving as expected. See
2
on page
40.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled.
Make sure your computer is in the same subnet as the Switch. (If you know that there are routers
4
between your computer and the Switch, skip this step.)
Reset the device to its factory defaults, and try to access the Switch with the default IP address. See
5
Section 4.8 on page
Chapter 51 Troubleshooting
http://DHCP-assigned IP
67.
XS1930 Series User's Guide
366
Section 4.8 on page
Section 4.8 on page
(when connecting to a DHCP server) or
67.
67.
I
Section 3.3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xs1930-12hpXs1930 seriesXs1930-10

Table of Contents