Firmware Upgrade - ZyXEL Communications GS1915 Series User Manual

Figure 178 Load Custom Default: Confirmation

31.3 Firmware Upgrade

Use the following screen to upgrade your Switch to the latest firmware. The Switch supports dual
firmware images, Firmware 1 and Firmware 2. Use this screen to specify which image is updated when
firmware is uploaded using the Web Configurator and to specify which image is loaded when the
Switch starts up.
Make sure you have downloaded (and unzipped) the correct model firmware and version to your
computer before uploading to the device.
Be sure to upload the correct model firmware as uploading the wrong
model firmware may damage your device.
Click Management > Maintenance > Firmware Upgrade to view the screen as shown next.
Figure 179 Management > Maintenance > Firmware Upgrade
The top of firmware upgrade screen shows which firmware version is currently running on the Switch.
Enter the path and file name of the firmware file you wish to upload to the Switch in the File Path text box
or click Choose File or Browse to locate it. Firmware upgrades are only applied after a reboot. Click
Upgrade to load the new firmware. Select the Config Boot Image drop-down list box if you want to
reboot the Switch and click Apply to apply the new firmware immediately. Click Upgrade to load the
new firmware.
Chapter 31 Maintenance
GS1915 Series User's Guide
250