26.1 SNMP Overview
This chapter introduces the SNMP screens and shows you how to setup SNMP settings for management.
26.1.1 What You Can Do
• Use the SNMP screen
• Use the SNMP User screen
managers using SNMP v3 and associate them to SNMP groups.
• Use the SNMP Trap Group screen
should be sent to each SNMP manager.
• Use the SNMP Trap Port screen
port.
26.2 Configure SNMP
Use this screen to configure your SNMP settings.
Click SYSTEM > SNMP to view the screen as shown.
Chapter 26 SNMP
(Section 26.2 on page
157) to configure general SNMP settings.
(Section 26.3 on page
(Section 26.4 on page
(Section 26.5 on page
XMG1915 Series User's Guide
157
C
H A P T E R
159) to create SNMP users for authentication with
161) to specify the types of SNMP traps that
162) to enable/disable sending SNMP traps on a
26
SNMP