Configuring Snmp - ZyXEL Communications XS1930-12HP User Manual

The following table describes the labels in this screen.
Table 151 Management > Access Control
LABEL
SNMP
Logins
Service Access
Control
Remote
Management

36.3 Configuring SNMP

Use this screen to configure your SNMP settings.
Click Management > Access Control > SNMP to view the screen as shown.
Figure 214 Management > Access Control > SNMP
The following table describes the labels in this screen.
Table 152 Management > Access Control > SNMP
LABEL
General Setting
Version
Chapter 36 Access Control
DESCRIPTION
Click this link to configure your SNMP settings.
Click this link to assign which users can access the Switch via web configurator at any one
time.
Click this link to decide what services you may use to access the Switch.
Click this link to specify a group of one or more "trusted computers" from which an
administrator may use a service to manage the Switch.
DESCRIPTION
Use this section to specify the SNMP version and community (password) values.
Select the SNMP version for the Switch. The SNMP version on the Switch must match the
version on the SNMP manager. Choose SNMP version 2c (v2c), SNMP version 3 (v3) or both
(v3v2c).
SNMP version 2c is backwards compatible with SNMP version 1.
XS1930 Series User's Guide
294