Initial Setup Example; Overview; Create A Vlan - ZyXEL Communications XMG1915 Series User Manual

5.1 Overview

This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•

Create a VLAN

• Set Port VID
• Configure Switch Management IP Address
5.1.1 Create a VLAN
VLANs confine broadcast frames to the VLAN group in which the ports belongs. You can do this with
port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 51 Initial Setup Network Example: VLAN
Go to the SWITCHING > VLAN > VLAN Setup > Static VLAN screen. Click Add/Edit.
1
Chapter 5 Initial Setup Example

Initial Setup Example

XMG1915 Series User's Guide
78
C
H A P T E R
5